Abstract:This study aimed to improve the performance of the activated carbon-based cathode by increasing the Li content and to analyze the effect of the combination of carbon and oxidizing agent. The crystal structure and chemical structure phase of Li-high surface area activated carbon material (Li-HSAC) was analyzed by X-ray diffraction (XRD) and Raman spectroscopy, the surface state and quantitative element by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and the surface properties with pore-size distribution by Brunauer–Emmett–Teller (BET), Barrett–Joyner–Halenda (BJH) and t-plot methods. The specific surface area of the Li-YP80F is 1063.2 m2/g, micropore volume value is 0.511 cm3/g and mesopore volume is 0.143 cm3/g, and these all values are higher than other LiOH-treated carbon. The surface functional group was analyzed by a Boehm titration, and the higher number of acidic groups compared to the target facilitated the improved electrolyte permeability, reduced the interface resistance and increased the electrochemical properties of the cathode. The oxidizing agent of LiOH treated high surface area of activated carbon was used for the cathode material for EDLC (electric double layer capacitor) to determine its electrochemical properties and the as-prepared electrode retained excellent performance after 10 cycles and 100 cycles. The anodic and cathodic peak current value and peak segregation of Li-YP80F were better than those of the other two samples, due to the micropore-size and physical properties of the sample. The oxidation peak current value appeared at 0.0055 mA/cm2 current density and the reduction peak value at –0.0014 mA/cm2, when the Li-YP80F sample used to the Cu-foil surface. The redox peaks appeared at 0.0025 mA/cm2 and –0.0009 mA/cm2, in the case of using a Nickel foil, after 10 cycling test. The electrochemical stability of cathode materials was tested by 100 recycling tests. After 100 recycling tests, peak current drop decreased the peak profile became stable. The LiOH-treated high surface area of activated carbon had synergistically upgraded electrochemical activity and superior cycling stability that were demonstrated in EDLC.

Structural and Electrochemical Properties of KOH-Activated Carbon Soot Derived from Sinapis alba (Yellow Mustard Oil) for EDLC Application

Activating agent-driven hierarchical nano-porous structure in mustard oil–derived carbon soot for supercapacitive application

KOH-activated microstructured carbon derived from Asclepias syriaca floss for extraordinary 200k cycle stability in supercapacitors

KOH Activation of Needle Coke to Develop Activated Carbons for High-Performance EDLC

Orange peel derived activated carbon for supercapacitor electrode material

Honeycomb-like Hierarchical Porous Activated Carbons from Biomass Waste with Ultrahigh Specific Surface Area for High-Rate Electrochemical Capacitors

The Superior Electrochemical Performance of Oxygen-Rich Activated Carbons Prepared from Bituminous Coal

Oaks-derived activated carbon by trace alkali-induced catalytic steam activation for electrochemical capacitor applications

Dual-doping activated carbon with hierarchical pore structure derived from polymeric porous monolith for high performance EDLC

Biodegradable methylcellulose biopolymer-derived activated porous carbon for dual energy application

Synthesis of a Very High Specific Surface Area Active Carbon and Its Electrical Double-Layer Capacitor Properties in Organic Electrolytes

An Effective Strategy to Synthesize Well-Designed Activated Carbon Derived from Coal-Based Carbon Dots via Oxidation before Activation with a Low KOH Content as Supercapacitor Electrodes

Hierarchically hybrid nanostructure of carbon nanoparticles decorated graphene sheets as an efficient electrode material for supercapacitors, aqueous Al-ion battery and capacitive deionization

An environmentally friendly process to derive N/O/S-codoped porous carbon from biomass waste with high yield for high performance supercapacitor

Porous network of nitrogen self-doped honeycomb like activated carbon derived from Caladium tricolor leaves: a multifunctional platform for energy and environmental applications

Surface Modification Effect and Electrochemical Performance of LiOH-High Surface Activated Carbon as a Cathode Material in EDLC

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

Almond Skin Derived Porous Biocarbon Nanoarchitectonics with Tunable Micro and Mesoporosity for CO 2 Adsorption and Supercapacitors

The Effect of the Ratio of KOH to Carbon on the Pore Structure and the Capacitance Characteristic of Activated Carbon

Surface Modification and Performance of Activated Carbon Electrode Material

Onion husk-derived high surface area graphene-like carbon for supercapacitor electrode material application