Abstract:Low-cost sulfur-doped porous carbons were prepared through hard template method by using inexpensive colloidal SiO2 nanoparticles as template, glucose as carbon source, H2SO4 as pre-carbonized reagent and sulfur source. The effects of H2SO4 and carbonization temperature on the microscopic morphology, the pore structure and the specific surface area of porous carbons were explored through multiple characterization methods. The capacitive performance of porous carbons was investigated by multiple electrochemical methods. It was found that the pore structure, specific surface area and the content of sulfur element of carbon are highly dependent on the carbonization temperature. The sulfur-doped porous carbon SPC-900 has much larger surface area and larger pore volume, and thus much better capacitive performance than un-doped PC-900, indicating that H2SO4 can increase the surface area and the pore volume during the preparation process. SPC-900 offers the advantages of lower cost, larger pore size, higher pore volume, better capacitive performance and better rate performance compared to expensive mesoporous carbon CMK-3. In the three-electrode system, the specific capacitance of SPC900 can reach 363 F g-1, whereas that of PC-900 is only 164 F g-1 at a current density of 0.5 A g-1. The double layer capacitance (EDLC) and pseudocapacitance can both be increased by the sulfur element, according to the capacitive contribution study. Additionally, the SPC-900 can maintain its initial specific capacitance of 98.1 % for 10,000 cycles at a current density of 0.5 A g-1, demonstrating both its high cycling performance and potential for practical applications.

Characterization of the Porous Carbon Prepared by Using Halloysite As Template and Its Application to EDLC

Porous carbon with tailored pore size for electric double layer capacitors application

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Preparation of porous carbons using a chrysotile template and their electrochemical performance as supercapacitor electrodes

Porous carbons originated from gelatin through molten salt templating in conjunction with chemical activation for ultracapacitors

A novel mesoporous carbon with straight tunnel-like pore structure for high rate electrochemical capacitors

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Synthesis of Mesoporous Carbon Using Halloyiste As Template

Hierarchical porous carbon applied in electric double layer capacitor

High Performance Mesoporous Carbon Material Prepared by Template-Physical Activation Method

Review on Preparation of Porous Carbons Via Templated Carbonization Method

Preparation of Inexpensive S-doped Porous Carbons for High-Performance Supercapacitors

Preparation of a porous carbon from Enteromorpha prolifera with excellent electrochemical properties

Preparation of hyper-crosslinked polymer derived porous carbon and its electrochemical properties

Synthesis of Mesoporous Carbon Spheres with a Hierarchical Pore Structure for the Electrochemical Double-Layer Capacitor

Superior capacitive storage behavior of porous carbon electrode with high mass loading

Dual-doping activated carbon with hierarchical pore structure derived from polymeric porous monolith for high performance EDLC

Monolithic Porous Carbon Derived from Polyvinyl Alcohol for Electrochemical Double Layer Capacitors

An Investigation on the Preparation of Porous Carbons with Zeolite Minerals As Templates

Preparation of Porous Carbons from Halloysite-Sucrose Mixtures