Abstract:The effect of normal stress variations on fault frictional strength has been extensively characterized in laboratory experiments and modelling studies based on a rate-and-state-dependent fault friction formalism. However, the role of pore pressure changes during injection-induced fault reactivation and associated frictional phenomena is still not well understood. We apply rate-and-state friction (RSF) theory in finite element models to investigate the effect of fluid pressurization rate on fault (re)activation and on the resulting frictional slip characteristics at the laboratory scale. We consider a stepwise injection scenario where each fluid injection cycle consists of a fluid pressurization phase followed by a constant fluid pressure phase. We first calibrate our model formulation to recently published laboratory results of injection-driven shear slip experiments. In a second stage, we perform a parametric study by varying fluid pressurization rates to cover a higher dimensional parameter space. We demonstrate that, for high permeability laboratory samples, the energy release rate associated with fault reactivation can be effectively controlled by a stepwise fluid injection scheme, i.e. by the applied fluid pressurization rate and the duration of the constant pressure phase between each successive fluid pressurization phase. We observe a gradual transition from fault creep to slow stick-slip as the fluid pressurization rate increases. Furthermore, computed peak velocities for an extended range of fluid pressurization rate scenarios (0.5 MPa/min to 10 MPa/min) indicate a non-linear (power-law) relationship between the imposed fluid pressurization rate and the peak slip velocities, and consequently with the energy release rate, for scenarios with a fluid pressurization rate higher than a critical value of 4 MPa/min. We also observe that higher pressurization rates cause a delay in the stress release by the fault. We therefore argue that by adopting a stepwise fluid injection scheme with lower fluid pressurization rates may provide the operator with a better control over potential induced seismicity. The implications for field-scale applications that we can derive from our study are limited by the high matrix and fault permeability of the selected sample and the direct hydraulic connection between the injection well and the fault, which may not necessarily represent the conditions typical for fracture dominated deep geothermal reservoirs. Nevertheless, our results can serve as a basis for further laboratory experiments and field-scale modelling studies focused on better understanding the impact of stepwise injection protocols on fluid injection-induced seismicity.

Evaluation of the fault reactivation dynamics using fully coupled hydro-mechanical models

Numerical analysis of injection-induced fault reactivation using hydro-mechanical coupled finite element model with cohesive zone elements

Fault slip in hydraulic stimulation of geothermal reservoirs: Governing mechanisms and process-structure interaction

The Role of Fault-Zone Architectural Elements on Pore Pressure Propagation and Induced Seismicity

Poromechanics of Fractured/Faulted Reservoirs During Fluid Injection Based on Continuum Damage Modeling and Machine Learning

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

CO2 storage in deep saline aquifers: evaluation of geomechanical risks using integrated modeling workflow

Implications for fault reactivation and seismicity induced by hydraulic fracturing

A Multiscale Hydro‐geochemical‐mechanical Approach to Analyze Faulted CO2 Reservoirs

Simulation of dynamic pulsing fracking in poroelastic media by a hydro-damage-mechanical coupled cohesive phase field model

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

Numerical investigation of the effect of fluid pressurization rate on laboratory-scale injection-induced fault slip

Modeling of Injection Induced Seismic Events

Asymptotic-Poroelastic Model for Reservoir Compaction Damage Management in Fractured Oil Wells with Stress-Dependent Permeability

Poromechanical Modeling and Numerical Simulation of Hydraulic Fracture Propagation.

Analysis of a Complex Faulted CO2 Reservoir Using a Three-dimensional Hydro-geochemical-Mechanical Approach

Coupled Boundary Element and Finite Volume Methods for Modeling Fluid-Induced Seismicity in Fault Networks within Low-Permeability Rocks

Numerical simulation of fluid injection-induced fault slip in heterogeneous shale formations

A Fully Coupled Thermo-Hydro-mechanical, Three-Dimensional Model for Hydraulic Stimulation Treatments

FEM Simulation of Fault Reactivation Induced with Hydraulic Fracturing in the Shangluo Region of Sichuan Province