Abstract:Noise pollution is an issue of high concern in urban environments and current standards and regulations trend to increase acoustic insulation requirements concerning airborne noise control. The design and development of novel building materials with enhanced acoustic performance is an efficient solution to mitigate this problem. Their application as renders and plasters can improve the acoustic conditions of existing and brand-new buildings. This paper reports the acoustic performance of eleven multiscale porous lime-cement mortars (MP-LCM) with two types of fibers (cellulose and polypropylene), gap-graded sand, and three lightweight aggregates (expanded clay, perlite, and vermiculite). Gap-graded sand was replaced by 25 and 50% of lightweight aggregates. A volume of 1.5% and 3% of cellulose fibers were added. The experimental study involved a physical characterization of properties related to mortar porous microstructure, such as apparent density, open porosity accessible to water, capillarity absorption, and water vapor permeability. Mechanical properties, such as Young's modulus, compressibility modulus, and Poisson's ratio were evaluated with ultrasonic pulse transmission tests. Acoustic properties, such as acoustic absorption coefficient and global index of airborne noise transmission, were measured using reduced-scale laboratory tests. The influence of mortar composition and the effects of mass, homogeneity, and stiffness on acoustic properties was assessed. Mortars with lower density, lower vapor permeability, larger open porosity, and higher Young's and compressibility modulus showed an increase in sound insulation. The incorporation of lightweight aggregates increased sound insulation by up to 38% compared to the gap-graded sand reference mixture. Fibers slightly improved sound insulation, although a small fraction of cellulose fibers can quadruplicate noise absorption. The roughness of the exposed surface also affected sound transmission loss. A semi-quantitative multiscale model for acoustic performance, considering paste thickness, active void size, and connectivity of paste pores as key parameters, was proposed. It was observed that MP-LCM with enhanced sound insulation, slightly reduced sound absorption.

Multiscale characterisation of acoustic behaviour of a new bio-based porous material

A semi-empirical model relating micro structure to acoustic properties of bimodal porous material

A Novel Multiscale Porous Composite Structure for Sound Absorption Enhancement

Acoustic modelling of 3D-printed hybrid materials: a preliminary study

Achievement of acoustical properties of foam materials by tuning membrane level: Elaborations, models and experiments

3D printed sound-absorbing materials with double porosity

Bottom-up approach for microstructure optimization of sound absorbing materials

Acoustic Assessment of Multiscale Porous Lime-Cement Mortars

Investigation of frequency dependent mechanical properties of porous materials using dynamic mechanical analyzer and frequency-temperature superposition theory

Optimization of 3D printed porous materials accounting for manufacturing defects

Improving acoustic wave propagation models in highly attenuating porous materials

A preliminary study of acoustic propagation in thick foam tissue scaffolds composed of poly(lactic-co-glycolic acid)

Biomimetic Coupling Structure Increases the Noise Friction and Sound Absorption Effect

Cubic elasticity of porous materials produced by additive manufacturing: experimental analyses, numerical and mean-field modelling

Sound absorption performance based on Auxetic microstructure model: a parametric study

Gaussian-Based Machine Learning Algorithm for the Design and Characterization of a Porous Meta-Material for Acoustic Applications

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction

Identification of viscoelastic material properties by ultrasonic angular measurements in double through-transmission

Microstructure-based modeling to characterize low pore density open-cell foams and its experimental validation

Elastic properties and compressive mechanical behaviour of closed-cell porous materials: Effect of microstructural morphology

The Sound Absorption Performance of Laser-Sintered Composite Biomimetic Wood Porous Structures