Characteristics Analysis of Plasticized Polyvinyl Chloride Gel-Based Microlens at Different Temperatures
Xudong Li,Min Lin,Imdad Ali,Ahmed Ali,Muhammad Irfan,Toufique A. Soomro,Seung Ho Choi,Weimin Yang,Haoyi Li,Saifur Rahman,Salim Nasar Faraj Mursal,Abdulnour Ali Jazem Ghanim,Othman Alyahyawy,Morooj A. Al thagafi
DOI: https://doi.org/10.1021/acsomega.3c04546
IF: 4.1
2023-07-26
ACS Omega
Abstract:Temperature plays a crucial role in the preparation of polyvinyl chloride (PVC) gels for optical applications. Incorrect temperature selection can lead to various issues such as poor surface roughness, inadequate light transmission, and insufficient solution for optical devices. To address this challenge, this study focuses on the preparation of PVC gel samples by combining PVC powder (n = 3000), eco-friendly dibutyl adipate, and tetrahydrofuran at different stirring temperatures ranging from 40 to 70 °C. The PVC gel preparation process is categorized into four groups (T40, T50, T60, and T70) based on the mixing temperatures, employing a controlled test method with specific temperature conditions. The prepared PVC gel samples are then subjected to analysis to evaluate various properties including surface morphology, tensile strength, light transmittance, and electrical response time. Among the samples, the PVC gel prepared at 60 °C (referred to as T60) exhibits excellent optical properties, with a transmittance of 91.2% and a tensile strength of 2.07 MPa. These results indicate that 60 °C is an optimal reaction temperature. Notably, the PVC gel microlenses produced at this temperature achieve their maximum focal length (ranging from -8 to -20 mm) within approximately 60 s, and they recover their initial state within around 80 s after the power is switched off. This focal length achievement is twice as fast as reported in previous studies on microlenses. It is observed that the reaction temperature significantly influences the solubility of the resin-based raw materials and the homogeneity of the gel. Consequently, these findings open up possibilities for utilizing PVC gel microlenses in novel commercial optics applications, thanks to their desirable properties.
chemistry, multidisciplinary