"PERFORMANCE ANALYSIS OF INERT GAS PLANT WITH SCRUBBER USING ANSYS FOR A VLCC SHIP"
Liviu-Constantin STAN,Catalin FAITAR,,
DOI: https://doi.org/10.53464/jmte.01.2023.09
2023-04-01
Journal of marine Technology and Environment
Abstract:"Through the 1978 SOLAS Protocol and then through the introduction of amendments from 1981 and 1983, new specifications are brought regarding the design, operation, maintenance, verification of inert gas systems intended for both oil tanks and bulk chemical tanks, and, in general, the systems of safety on board ships carrying dangerous goods. The inerting method using a gas system with generator and scrubber involves a continuous and very efficient process, with a low level of supervision and maintenance, that is why this type of installation was chosen in this study. Installations with a scrubber type unit require the installation of an inert gas generator that operates at a pressure of 8-10 bar and releases nitrogen at 7-9 bar. The quality of the air will depend on the type of generator used, scrubber type unit, but air without impurities with the best possible quality is recommended. Nitrogen quality for a given unit varies with production rate and is generally 95-97% pure. By connecting high-quality scrubbers, nitrogen can be brought to 99% purity, but at lower production rates and much higher energy consumption rates of any system on board ship is specifically identified with its reliability. So as to get the best out of marine motors, it is critical to screen their performances and take measures to accomplish productive combustion. As a result of heat gains on board ships from engine rooms and crew, the increase in humidity as well as due to the various releases of gases from on board systems, room air deteriorates, requiring replacement and its processing through the HVAC (heat, ventilation and air conditioning) system. The combustion process in diese."