Abstract:Polymer-based nanocomposites have been broadly investigated to improve its specific properties such as thermal and mechanical properties to use in different application areas. In this study, we aimed to ameliorate the desired physical properties of polyvinyl butyral (PVB) by introducing various amounts of silver (Ag) and cobalt (Co) nanoparticles (NPs) in the polymer matrix. The arc-discharge method submerged in liquid nitrogen was performed to synthesize the metal NPs. To produce hybrid nanocomposites, we demonstrated embedding Ag:Co nanoparticles in the PVB matrix via easy/low-cost solution casting process without any additional materials. In the results of analysis for nanocomposites, it was observed that there were improvements in thermal, mechanical and microwave absorption characteristics of the PVB polymer with interaction of NPs with the polymer. As a result of these interactions, the hybridization of PVB with the metal NPs resulted in the improved thermal stability since the glass transition temperature was increased from 45.6 to 55.1 °C. Besides, while the tensile strength (σ) of the bare PVB film was calculated as 20.52 MPa, the strength of the corresponding tensile strength (σ) of 1.0 wt.% Ag:Co nanocomposite film was improved to 43.41 MPa. Moreover, in order to determine the effect of these changes on the radar absorption feature of nanocomposites, one-dimensional A-Scan measurements were performed on 2–18 GHz frequency band. In the results, it was observed that 1.0%.wt Ag:Co nanocomposite film absorbed approximately 90% of the incoming energy. The characterization results revealed that a positive synergetic effect raised in the case of the modification of the PVB matrix with both Ag and Co NPs. In the light of these data, it was understood that the characteristics of PVB were improved with the NPs combining, and the usage area of that will also increase thanks to this improvement. These regenerated properties made the hybrid nanocomposite a promising substrate material with considerable potential applications for various transparent, flexible, and portable surface coatings.

Preparation of polyvinyl acetate composite as a new backing material for the manufacture of ultrasonic transducers

Improving the thermal dimensional stability of flexible polymer composite backing materials for ultrasound transducers

Acoustic And Optoelectronic Nature And Interfacial Durability Of Modified Cnt And Gnp-Pvdf Composites With Nano-Structural Control

Uniaxial pressing of aluminium powder to design thin lamellar high damping backing materials for high-temperature ultrasonic probes

Hybrid nanoparticles embedded polyvinyl butyral nanocomposites for improved mechanical, thermal and microwave absorption performance

Biocompatible Piezoelectric PVDF/HA/AgNO3 Thin Film Prepared by the Solvent Casting Method

Viability of Ultrasonic Sonochemical processing for nanostructures: Case study of Aluminum-crystal growth and Poly (vinylpyrrolidone)-graphitization

Highly sensitive self-focused ultrasound transducer with a bionic back-reflector for multiscale-resolution photoacoustic microscopy

Biologically Compatible Lead-Free Piezoelectric Composite for Acoustophoresis Based Particle Manipulation Techniques

Exploring Acoustic Properties of Banana Fiber Composites with elastomeric filler through a computational approach

Anodic Aluminum Oxide-Epoxy Composite Acoustic Matching Layers for Ultrasonic Transducer Application.

Optimized Backing Layers Design for High Frequency Broad Bandwidth Ultrasonic Transducer

Performance Assessment of Nanofiber Integrated Polymer Composite as Electromagnetic Wave Absorber

Characteristics of Poly(vinyl Alcohol) (PVA) Based Composites Integrated with Green Synthesized Al3+-Metal Complex: Structural, Optical, and Localized Density of State Analysis

Study of the structural, optical and electrical properties of PVA/SA performance by incorporating Al2O3 nanoparticles

Dynamic Response of a Polyvinylidene Fluoride (PVDF) Sensor Embedded in a Metal Structure Using Ultrasonic Additive Manufacturing

Structural, morphological, thermal, mechanical, positron annihilation, and γ-ray shielding studies of nano-tungsten oxide/polyvinyl alcohol composites

Design, fabrication, and evaluation of high frequency, single-element transducers incorporating different materials

New Composite Materials Based on PVA, PVP, CS, and PDA

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.

Experimental Study on the Acoustoelastic Effect in Composites Using Ultrasonic Waves