Abstract:This research paper is concentrated on the design of biologically compatible lead-free piezoelectric composites which may eventually replace traditional lead zirconium titanate (PZT) in micromechanical fluidics, the predominantly used ferroelectric material today. Thus, a lead-free barium-calcium zirconate titanate (BCZT) composite was synthesized, its crystalline structure and size, surface morphology, chemical, and piezoelectric properties were analyzed, together with the investigations done in variation of composite thin film thickness and its effect on the element properties. Four elements with different thicknesses of BCZT layers were fabricated and investigated in order to design a functional acoustophoresis micromechanical fluidic element, based on bulk acoustic generation for particle control technologies. Main methods used in this research were as follows: FTIR and XRD for evaluation of chemical and phase composition; SEM-for surface morphology; wettability measurements were used for surface free energy evaluation; a laser triangular sensing system-for evaluation of piezoelectric properties. XRD results allowed calculating the average crystallite size, which was 65.68 Å3 confirming the formation of BCZT nanoparticles. SEM micrographs results showed that BCZT thin films have some porosities on the surface with grain size ranging from 0.2 to 7.2 µm. Measurements of wettability showed that thin film surfaces are partially wetting and hydrophilic, with high degree of wettability and strong solid/liquid interactions for liquids. The critical surface tension was calculated in the range from 20.05 to 27.20 mN/m. Finally, investigations of piezoelectric properties showed significant results of lead-free piezoelectric composite, i.e., under 5 N force impulse thin films generated from 76 mV up to 782 mV voltages. Moreover, an experimental analysis showed that a designed lead-free BCZT element creates bulk acoustic waves and allows manipulating bio particles in this fluidic system.

Uniaxial pressing of aluminium powder to design thin lamellar high damping backing materials for high-temperature ultrasonic probes

Improving the thermal dimensional stability of flexible polymer composite backing materials for ultrasound transducers

ACOUSTIC PROPERTIES OF Pb-17Li ALLOY FOR ULTRASONIC DOPPLER VELOCIMETRY

High temperature ultrasonic transducers for imaging and measurements in a liquid Pb/Bi eutectic alloy

Preparation of polyvinyl acetate composite as a new backing material for the manufacture of ultrasonic transducers

Passive Materials For High Frequency Ultrasound Transducers

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Dry Coupling of Ultrasonic Transducer Components for High Temperature Applications

Alumina/epoxy Nanocomposite Matching Layers for High-Frequency Ultrasound Transducer Application

Biologically Compatible Lead-Free Piezoelectric Composite for Acoustophoresis Based Particle Manipulation Techniques

Contactless Ultrasonic Cavitation in Alloy Melts

Design, finite element analysis, fabrication and electroacoustic characterization of transducer arrays from piezoceramics with hollow cylindrical shell form

Wafer-level experimental study of residual stress in AlN-based bimorph piezoelectric micromachined ultrasonic transducer

Surface acoustic wave spectroscopy for non‐destructive coating and bulk characterization at temperatures up to 600°C enabled by piezoelectric aluminum nitride coated sensor

Acoustic-pressure-assisted engineering of aluminium foams

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.

P3Q-4 Nanocomposite Matching Layers for High Frequency Ultrasound Transducers

X-ray and optical crystallographic parameters investigations of high frequency induction melted Al-(alpha-Al(2)O(3)) alloys

Design, fabrication, and evaluation of high frequency, single-element transducers incorporating different materials

Optimized Design of High-Temperature Resistant Air-Coupled Ultrasonic Transducer (ACUT) Based on Single Acoustic Matching Layer