Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Towards Determining an Engineering Stress-Strain Curve and Damage of the Cylindrical Lithium-Ion Battery Using the Cylindrical Indentation Test

(Invited) Understanding the Coupled Electrochemical-Mechanical Behavior of Materials for Improving the Performance and Durability of Lithium-Ion Batteries

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

Impedance-based Diagnosis of Internal Mechanical Damage for Large-Format Lithium-Ion Batteries

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells

Prediction of Internal Circuit and Mechanical-Electrical-Thermal Response of Lithium-Ion Battery Cell with Mechanical-Thermal Coupled Analysis

Dynamic crushing behaviors and failure of cylindrical lithium-ion batteries subjected to impact loading

Influence of Component Properties on Mechanical Response of Lithium-Ion Battery Jellyrolls Subjected to Indentation: Quick Prediction and Parametric Study

A novel anisotropic model for multi-stage failure threshold of Lithium-ion battery subjected to impact loading

Mechanical Damage in a Lithium-Ion Pouch Cell under Indentation Loads

Dynamic responses of cylindrical lithium-ion battery under localized impact loading

Damage of Prismatic Lithium‐ion Cells Subject to Bending: Test, Model, and Detection

Investigation of the mechanical response and modeling of prismatic lithium-ion batteries upon abusive loading

Mechanical Deformation of Lithium-Ion Pouch Cells under In-Plane Loads-Part I: Experimental Investigation

Direction-dependent Mechanical-Electrical-thermal Responses of Large-Format Prismatic Li-ion Battery under Mechanical Abuse

Simplified layered model of pouch cell for varied load cases: An indentation and three-point bending study

Internal short circuit and dynamic response of large-format prismatic lithium-ion battery under mechanical abuse

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Comparative Study of Mechanical-Electrical-thermal Responses of Pouch, Cylindrical, and Prismatic Lithium-Ion Cells under Mechanical Abuse

Dynamic Crushing Behaviors of Cylindrical Lithium-Ion Battery Under Multiple Impacts: An Experimental Study