Abstract:High-frequency vibrations resulting from many factors under loads existing in the wheel-rail system have a huge impact on the structure and properties of rail steel: there are signifi contact stresses in the surface layer that affect strength characteristics and overall fatigue of the railway track structure. Such an impact results, in particular, in the formation of the so-called White Layer (WL): a hardened layer on the surface of the base material, resistant to chemical etching, and having high hardness (above 1000 HV) and brittleness. The objective of the research was to study the features of the formation mechanism, as well as the properties of the white layer formed on the metal surface using an integrated approach, namely, of destructive testing methods, electron microscopy, XRD, metallography, and microhardness measurements. The reliability of experimental studies is due to the use of standardised test methods, developed methods of destructive and non-destructive testing in the main areas, the involvement of an accredited and certified laboratory, which makes it possible to fulfill in full the tasks set with appropriate quality. The results of the research allowed to present an analysis of the white layer, the formation of which took place in high-carbon M76 rail steel after cyclic tests with a 20 kHz frequency. The morphology, phase composition, and microhardness of these inclusions have been studied in detail in comparison with the base metal. It is shown that the white layer is highly dispersed, pearlitelike, featureless inclusions of a ferrite-cementite structure, while their microhardness is 3–4 times higher than the original steel and is of 1000–1200 HV. A possible explication of a mechanism of the formation of a white layer is suggested: crushing of ferrite and cementite, which are part of pearlite, without intermediate phase transformations.

Formation Mechanism of Brown Etching Layers in Pearlitic Rail Steel

Heterogenous structure and formation mechanism of white and brown etching layers in bainitic rail steel

A Novel Mechanism of the Formation of White and Brown Etching Layer in Bainitic Rail Steel

Microstructure characteristics and formation mechanisms of white etching layer (WEL) and brown etching layer (BEL) on martensite bearing raceway

Phase and Microstructural Evolution in White Etching Layer of a Pearlitic Steel During Rolling–sliding Friction

Influence of stratified tribologically transformed structure layers on contact fatigue crack initiation of bainitic rail steel

White Layer in M76 High Carbon Rail Steel: Formation Mechanism and Properties

Formation Mechanisms and Crack Propagation Behaviors of White Etching Layers and Brown Etching Layers on Raceways of Failure Bearings

Microstructure of the Worn Surfaces of a Bainitic Steel Railway Crossing

Stratified surface layers affecting crack propagation in wheel-rail contacts

Consequences of thermite welding on the microstructure of the heat affected zone of a carbide-free bainitic steel rail

Influence of thermal loading parameters and microstructure on the formation of stratified surface layers on railway wheels

Dynamic mechanical behaviors of pearlitic U71MnG rail steel: Deformation mechanisms and constitutive model

Evolution of the Lamellar Pearlite Structure of Rail Steel under Tension

Characterization of the Microstructure Changes Induced by a Rolling Contact Bench Reproducing Wheel/Rail Contact on a Pearlitic Steel

Evaluation of Mechanisms for Strengthening of Surface Layers of Long Rails in Different Directions Under Continuous Operation

Effect of intrinsic thermal cycles on the microstructure and mechanical properties of heat affect zones in laser cladding coatings on full-scale rails

Hydrogen Embrittlement Behavior of High Strength Rail Steels: A Comparison Between Pearlitic and Bainitic Microstructures

Effect of microstructure on wear and rolling contact fatigue behaviors of bainitic/martensitic rail steels

New insight into the dry rolling-sliding wear mechanism of carbide-free bainitic and pearlitic steel

Understanding Microstructure-Evolution-dependent Fracture Behaviors in Pearlitic Steels