Abstract:Mechanical behaviors of a Ni-based single crystal superalloy have been investigated by tensile testing at various temperatures. Deformation substructures and mechanisms have been systemically revealed from micrometer to atomic scales by using advanced scanning electron and scanning transmission electron microscopes. Results show that deformation mode of the alloy strongly depends on the temperature due to competitive responses of the gamma and gamma' phases under mechanical loading and their original stress statuses. At temperatures from ambient to 750 degrees C, plasticity is governed by dislocation shearing in both phases, where slip modes of gamma are < 110 >{111} and those of gamma' are < 112 >{111}, < 110 >{111} and < 110 > {001}. At moderate temperatures (850 degrees C <= T <= 900 degrees C), plasticity mainly involves microscopically uniform deformation of both phases. The matrix deforms first so that channels parallel to tensile direction are narrowed due to the Poisson's effect, after that deformation of gamma' follows. The active slip modes are < 110 > {111} for gamma, < 112 >{111}, < 110 >{111}, < 110 >{001}, and < 001 >{001} for gamma'. At temperature higher than 1000 degrees C, plastic strain is also derived from deformation of both phases, but deformation of the matrix plays critical roles, due to relatively weak strength of this phase. The operative slip modes are < 110 > {111} for gamma, but mainly < 110 >{001} and < 001 >{001} for gamma'. Our results clearly provide a comprehensive and multiscale (from micrometer to atomic) understanding on the deformation mechanism of Ni-based superalloys, which can be critically beneficial and offer mechanistic guidelines to design new/next generation superalloys. (c) 2021 Elsevier Ltd. All rights reserved.

The Influence of Strain Path and Heat Treatment Variations on Recrystallization in Cold-Rolled High-Purity Niobium Polycrystals

Microstructural Refinement of Niobium for Superconducting RF Cavities

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Systematic study of niobium thermal treatments for superconducting radio frequency cavities employing X-ray photoelectron spectroscopy

Nanostructural features degrading the performance of superconducting radio frequency niobium cavities revealed by TEM and EELS

The oxidation behaviors of high-purity niobium for superconducting radio-frequency cavity application in vacuum heat treatment

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

Crystallinity in Niobium oxides: A pathway to mitigate Two-Level System Defects in Niobium 3D Resonator for quantum applications

Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

Temperature-dependent near-surface interstitial segregation in niobium

Influence of material parameters on the performance of niobium based superconducting RF cavities

The nontrivial effects of annealing on superconducting properties of Nb single crystals

Experimental and Numerical Studies on Recrystallization Behavior of Single-Crystal Ni-Base Superalloy

Metallurgical and Technological Request for High Purity Niobium in SRF Application

The effect of deformation temperature on recrystallization in a Ni-based single crystal superalloys

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Role of microstructure on flux expulsion of superconducting radio frequency cavities

Effect of Successive Heat Treatment on the Performance of Superconducting Radio Frequency Niobium Cavities

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

The Effect of Mechanical Cold Work on the Magnetic Flux Expulsion of Niobium