Abstract:Compared to conventional monoethanolamine (MEA), alternative solvents are expected to substantially contribute to reduce the energy demand of post-combustion CO 2 capture from flue gases. This study presents a comprehensive techno-economic analysis of a 27 wt% 2-amino-2-methyl-1-propanol (AMP) + 13 wt% piperazine (PZ) aqueous solution for CO 2 capture, compared to a 30 wt% MEA solution. The study addresses the retrofit of a carbon capture unit to a biomass-fired combined heat and power (CHP) plant, effectively making it a bioenergy with a carbon capture and storage (BECCS) system. The treated flue gas has a flow rate of 23 tons/hour (t/h) with 11.54 vol% CO 2 and a 90% capture rate is aimed for. Aspen Plus V14 was employed for process simulations. Initially, binary interaction parameters for AMP/PZ, AMP/H 2 O, and PZ/H 2 O are regressed using vapor-liquid equilibrium (VLE) data, which were retrieved from literature along with reaction kinetics. Validation of parameters from available experimental literature yields an average absolute relative deviation (AARD) of only 5.9%. Afterwards, a process simulation model is developed and validated against experimental data from a reference pilot plant, using a similar AMP/PZ blend, resulting in 5% AARD. Next, a sensitivity analysis optimizes operating conditions, including solvent rate, absorber/stripper packing heights, and stripper pressure, based on regeneration energy impact. Optimized results, compared to MEA, reveal that AMP/PZ reduces the energy consumption from 3.61 to 2.86 GJ/tCO 2 . The retrofitting of the capture unit onto the selected CHP plant is examined through the development of a dedicated model. Two control strategies are compared to address energy unavailability for supplying the capture unit. The analysis spans 4 months, selected to account for seasonal variations. At nominal capacity, CO 2 emissions, rendered negative by biomass combustion and CO 2 capture, reach a maximum of −3.4 tCO 2 /h compared to 0.36 tCO 2 /h before retrofitting. Depending on the control strategy and CHP plant operating point, the Specific Primary Energy Consumption for CO 2 Avoided (SPECCA) ranges from 4.91 MJ/kgCO 2 to 1.76 MJ/kgCO 2 . Finally, an economic comparison based on systematic methodology reveals a 7.87% reduction in capture cost favoring the AMP/PZ blend. Together, these findings highlight AMP/PZ as a highly favorable alternative solvent.

Real-time monitoring of 2-amino-2-methylpropan-1-ol and piperazine emissions to air from TCM post combustion CO2 capture plant during treatment of RFCC flue gas

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Aerosol Emissions and Mitigation of Aqueous AMP/PZ Solvent for Postcombustion CO2 Capture

Evaluation of a New Chemical Mechanism for 2-Amino-2-methyl-1-propanol in a Reactive Environment from CSIRO Smog Chamber Experiments.

Techno-economic analysis of AMP/PZ solvent for CO2 capture in a biomass CHP plant: towards net negative emissions

Results from trialling aqueous ammonia-based post-combustion capture in a pilot plant at Munmorah Power Station: Gas purity and solid precipitation in the stripper

A Mobile Laser Mass Spectrometer (REMPI-TOFMS) for Continuous Monitoring of Toxic Combustion Byproducts: Real-time On-line Analysis of PAH in Waste Incineration Flue Gases

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

An Online Technology for Effectively Monitoring Inorganic Condensable Particulate Matter Emitted from Industrial Plants.

Industrial test of post combustion CO2 capture by reactive absorption with two new solvents in natural gas power plant

Aerosol Emissions of Amine-Based CO<sub>2</sub> Absorption System: Effects of Condensation Nuclei and Operating Conditions

An update of the benchmark post-combustion CO2-capture technology

An Efficient Multipollutant System for Measuring Real-World Emissions from Stationary and Mobile Sources

Real-time on-site monitoring of soil ammonia emissions using membrane permeation-based sensing probe

Performance study on mixed solvent for post‐combustion carbon capture using rotating packed bed technology

High amine emissions formation and aerosol particle size distribution in post-combustion CO2 capture process

Aqueous Ammonia Based Post Combustion Capture: Results from Pilot Plant Operation, Challenges and Further Opportunities

Dynamic modelling, identification and preliminary control analysis of an amine-based post-combustion CO2 capture pilot plant

Online Volatile Compound Emissions Analysis Using a Microchamber/Thermal Extractor Coupled to Proton Transfer Reaction-Mass Spectrometry

Continuous CO 2 Capture in a Circulating Fluidized Bed Using Supported Amine Sorbents

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant