Abstract:Multichip SiC power modules with Kelvin-source connection are popular in applications with large capacity and high switching frequency. However, dynamic current imbalance among paralleled dies due to asymmetric layout limits the available capacity. Thus, this article proposes a method to mitigate the mismatched dynamic current by adjusting the connection points of bonding wires and copper traces. The response surface models and nonlinear constrained optimization algorithms are introduced for the first time to help determine the optimized positions for the connection points. By this method, the dynamic current imbalance can be well suppressed under various working conditions. Besides, the method is cost-efficient and well compatible with the conventional manufacturing technologies because there need no additional efforts but some modifications on bonding wires. At first, the optimization guidelines are obtained after analyzing the mechanism of dynamic current imbalance among paralleled SiC MOSFETs with Kelvin-source connection. Based on the optimization guidelines and response surface models of parasitic inductance, the dynamic current sharing problem can be transformed into a nonlinear constrained optimization issue in mathematics. According to the solution of the mathematic problem, the optimized positions for connection points of bonding wires and copper traces can be determined. Finally, some simulations and experiments are conducted to verify the effectiveness of the proposed method.

Analysis of Current Imbalance in Paralleled Silicon Carbide Power MOSFETs

Analysis on Static Current Sharing of N-Paralleled Silicon Carbide MOSFETs

Dynamic Current Balancing for Paralleled SiC MOSFETs with Circuit Mismatches Considering Circulating C Urrent in Drive Circuit

Comprehensive Analysis of Paralleled SiC MOSFETs Current Imbalance under Asynchronous Gate Signals

Parallel Connection of Silicon Carbide MOSFETs Challenges, Mechanism, and Solutions

Comparative Investigation on Paralleling Suitability for SiC MOSFETs and SiC/Si Cascode Devices

Active Gate Driver for Dynamic Current Balancing of Parallel-Connected SiC MOSFETs

Symmetric Circuit Layout with Decoupled Modular Switching Cells for Multiparalleled SiC Mosfets

An Active Gate Driver for Dynamic Current Sharing of Paralleled SiC MOSFETs

Output Curves Based Hierarchical Clustering Screening Method with Static/Dynamic Current Balancing for Paralleled SiC MOSFETs

Imbalance Current Analysis and Its Suppression Methodology for Parallel SiC MOSFETs with Aid of a Differential Mode Choke.

Die Current Balancing of a Press-Pack SiC MOSFET

A Method to Balance Dynamic Current of Paralleled SiC MOSFETs With Kelvin Connection Based on Response Surface Model and Nonlinear Optimization

An Effective Current Balancing Method for Inverters with Paralleled Silicon Carbide Power Modules

Switching Current Imbalance Mitigation for Paralleled SiC MOSFETs Using Common-mode Choke in Gate Loop

Analysis and Suppression for Gate Oscillation Caused by Body Diodes on Paralleled SiC MOSFETs Application

Effects of On-State Resistance Temperature Effect on the Static Current Balancing Capability of SiC MOSFET Power Module

Clustering Algorithm for the Screening of SiC MOSFETs Connected in Parallel

Comparative Analysis and Evaluation of Gate Driver Topologies for Paralleling Silicon Carbide (sic) Power Modules

A Hybrid Current Balancing Method for Multiple Paralleled SiC-MOSFET Half-bridge Modules

Electrothermal Modelling and Measurements of Parallel-Connected VTH Mismatched SiC MOSFETs under Inductive Load Switching