Abstract:This work focuses on the design trade-off aspects related to the structural behavior of tall buildings subjected to the actions of wind and earthquake and on the feasibility of adopting innovative low-damage structural systems and connections combining engineered wood and steel. A multi-hazard approach is developed and proposed, through the use of an efficient equivalent baseline reference to compare the structural performance under two independent whilst competing hazards. Following a capacity-vs-demand approach an Acceleration Displacement Response Spectrum (ADRS) domain, well established in the earthquake engineering environment, is suggested to be extended and adapted to wind design. The innovative procedure is developed and implemented with reference to two case study tall buildings, 18 storey and 36 storey high, respectively. The use of either traditional steel-only connections or innovative low-damage steel-timber hybrid - unbonded post-tensioned rocking-dissipative – connections are employed and compared. Two difference constructions sites are considered: 1) a high seismicity and low wind zone and 2) low seismicity and high wind zone. A Direct Displacement Based Design (DBDD) procedure is firstly implemented to design the structural system targeting the desired level of seismic performance. Then the effects of wind loading are estimated through the analytical procedure provided by the Italian National Research Council (CNR), which allows to calculate wind-induced forces and peak floor accelerations. Peak interstorey drifts are selected as seismic performance indicator, while peak floor accelerations are selected as wind performance indicator with the intent to focus on the building occupants' comfort serviceability limit state. The predicted structural performances are then numerically validated through time series/history analyses under earthquake and wind loading with a lumped plasticity global model of the case-study buildings. Finally, the structural responses under the two actions are compared within the proposed innovative common baseline ADRS domain, allowing to establish the governing design hazard depending on the intensity levels and adopted return periods. Based on these developments, a true multi-hazard approach is proposed for the preliminary design phase of a building subjected to wind and earthquake loading.

Analysis of the dynamic structural behavior of tall buildings subjected to the transversal action of the wind: considering their interaction with the ground

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Wind-induced Stochastic Response of Controlled Tall Buildings by Complex-Mode Analysis

Effects of Geometric Nonlinearity and Aerodynamic Damping on the Dynamic Structural Response of Tall Buildings: A Case Study

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Wind Environment Evaluation for Tall Building Complexes with Various Plan Arrangement

Structural Improvements for Tall Buildings under Wind Loads: Comparative Study

Directional alongwind and crosswind effects on the performance of a 15-storey steel braced frame building in seismic environment

Evaluation of horizontal loads in the concept design of tall building concrete structures

Integrated Structural Optimization and Vibration Control for Improving Wind-induced Dynamic Performance of Tall Buildings

Nondeterministic Dynamic Analysis and Structural Optimisation of the Steel Towers Design for Wind Turbines Support

Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading

Structural Response Analysis and Comfort Evaluation of Residential Buildings: A Combined Wind Tunnel and FEM Approach

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Dynamic response and vibration suitability analysis of the large-span double-connected structure under coupled wind and pedestrian loads

Investigation of the Effect of the Wind Speed on the Aerodynamic and Architectural Design of Tall Buildings

Analytical and numerical solution of generalized static analysis of tall buildings: double-beam systems Timoshenko

3-D wind load and wind-induced response of X-shaped tall building

Dynamical performances of a wind‐excited high‐rise structure equipped with a multiblock movable faca̧de

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study