Abstract:This work focuses on the design trade-off aspects related to the structural behavior of tall buildings subjected to the actions of wind and earthquake and on the feasibility of adopting innovative low-damage structural systems and connections combining engineered wood and steel. A multi-hazard approach is developed and proposed, through the use of an efficient equivalent baseline reference to compare the structural performance under two independent whilst competing hazards. Following a capacity-vs-demand approach an Acceleration Displacement Response Spectrum (ADRS) domain, well established in the earthquake engineering environment, is suggested to be extended and adapted to wind design. The innovative procedure is developed and implemented with reference to two case study tall buildings, 18 storey and 36 storey high, respectively. The use of either traditional steel-only connections or innovative low-damage steel-timber hybrid - unbonded post-tensioned rocking-dissipative – connections are employed and compared. Two difference constructions sites are considered: 1) a high seismicity and low wind zone and 2) low seismicity and high wind zone. A Direct Displacement Based Design (DBDD) procedure is firstly implemented to design the structural system targeting the desired level of seismic performance. Then the effects of wind loading are estimated through the analytical procedure provided by the Italian National Research Council (CNR), which allows to calculate wind-induced forces and peak floor accelerations. Peak interstorey drifts are selected as seismic performance indicator, while peak floor accelerations are selected as wind performance indicator with the intent to focus on the building occupants' comfort serviceability limit state. The predicted structural performances are then numerically validated through time series/history analyses under earthquake and wind loading with a lumped plasticity global model of the case-study buildings. Finally, the structural responses under the two actions are compared within the proposed innovative common baseline ADRS domain, allowing to establish the governing design hazard depending on the intensity levels and adopted return periods. Based on these developments, a true multi-hazard approach is proposed for the preliminary design phase of a building subjected to wind and earthquake loading.

Structural Improvements for Tall Buildings under Wind Loads: Comparative Study

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Analysis of the dynamic structural behavior of tall buildings subjected to the transversal action of the wind: considering their interaction with the ground

Integrated Structural Optimization and Vibration Control for Improving Wind-induced Dynamic Performance of Tall Buildings

Directional alongwind and crosswind effects on the performance of a 15-storey steel braced frame building in seismic environment

Dynamical performances of a wind‐excited high‐rise structure equipped with a multiblock movable faca̧de

Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading

Wind-Induced Phenomena in Long-Span Cable-Supported Bridges: A Comparative Review of Wind Tunnel Tests and Computational Fluid Dynamics Modelling

Study of Wind Loads and Wind Speed Amplifications on High-Rise Building with Opening by Numerical Simulation and Wind Tunnel Test

A Novel Integrated Optimization-Driven Design Framework for Minimum-Weight Lateral-Load Resisting Systems in Wind-Sensitive Buildings Equipped with Dynamic Vibration Absorbers

Comfort assessment of high‐rise timber buildings exposed to wind‐induced vibrations

Effects of Geometric Nonlinearity and Aerodynamic Damping on the Dynamic Structural Response of Tall Buildings: A Case Study

Structural Response Analysis and Comfort Evaluation of Residential Buildings: A Combined Wind Tunnel and FEM Approach

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Improvement of Wind-Induced Responses of Twin Towers Using Modal Substructure Method with Link Bridges

Assessment of Across-Wind Responses for Aerodynamic Optimization of Tall Buildings

Performance-Based Design Optimization of Tall Concrete Framed Structures Subject to Wind Excitations

Experimental Technology on Dynamic Wind Loads on a Tall Building

Investigation of the Effect of the Wind Speed on the Aerodynamic and Architectural Design of Tall Buildings