Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using a novel regularized deep learning approach

Prediction of Compressive Strength of Glass Powder Concrete Based on Artificial Intelligence

Compressive Strength Prediction Using Coupled Deep Learning Model with Extreme Gradient Boosting Algorithm: Environmentally Friendly Concrete Incorporating Recycled Aggregate

Deep learning and supervised learning techniques for modeling and prediction of strength of ground granulated blast furnace slag based sustainable mortar

Leveraging a Hybrid Machine Learning Approach for Compressive Strength Estimation of Roller-Compacted Concrete with Recycled Aggregates

Prediction of high-performance concrete compressive strength using deep learning techniques

Efficient compressive strength prediction of concrete incorporating industrial wastes using deep neural network

Predicting the compressive strength of steelmaking slag concrete with machine learning – Considerations on developing a mix design tool

Virtual Mix Design: Prediction of Compressive Strength of Concrete with Industrial Wastes Using Deep Data Augmentation

Compressive strength prediction of fly ash and blast furnace slag-based geopolymer concrete using convolutional neural network

Computation of Compressive Strength of GGBS Mixed Concrete using Machine Learning

Evaluation of the post fire mechanical strength properties of recycled aggregate concrete containing GGBS: optimization and prediction using machine learning techniques

Prediction of concrete compressive strength using a Deepforest-based model

Predicting the Compressive Strength of Green Concrete at Various Temperature Ranges Using Different Soft Computing Techniques

Compressive Strength Estimation of Fly Ash/Slag Based Green Concrete by Deploying Artificial Intelligence Models

Prediction of high-performance concrete compressive strength through novel structured neural network

Prediction Compressive Strength of Concrete Containing GGBFS using Random Forest Model

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

Predicting Compressive Strength of Concrete Containing Industrial Waste Materials: Novel and Hybrid Machine Learning Model

Deep learning–based prediction of compressive strength of eco-friendly geopolymer concrete

Prediction of the compressive strength of Flyash and GGBS incorporated geopolymer concrete using artificial neural network