Abstract:As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of its components, this work proposes a thorough system or framework for estimating the compressive strength of fly ash-based geopolymer concrete (FAGC). It could be possible to construct a system for predicting the compressive strength of FAGC using soft computing methods, thereby avoiding the requirement for time-consuming and expensive experimental tests. A complete database of 162 compressive strength datasets was gathered from the research papers that were published between the years 2000 and 2020 and prepared to develop proposed models. To address the relationships between inputs and output variables, long short-term memory networks were deployed. Notably, the proposed model was examined using several soft computing methods. The modeling process incorporated 17 variables that affect the CSFAG, such as percentage of SiO2 (SiO2), percentage of Na2O (Na2O), percentage of CaO (CaO), percentage of Al2O3 (Al2O3), percentage of Fe2O3 (Fe2O3), fly ash (FA), coarse aggregate (CAgg), fine aggregate (FAgg), Sodium Hydroxide solution (SH), Sodium Silicate solution (SS), extra water (EW), superplasticizer (SP), SH concentration, percentage of SiO2 in SS, percentage of Na2O in SS, curing time, curing temperature that the proposed model was examined to several soft computing methods such as multi-layer perception neural network (MLPNN), Bayesian regularized neural network (BRNN), generalized feed-forward neural networks (GFNN), support vector regression (SVR), decision tree (DT), random forest (RF), and LSTM. Three main innovations of this study are using the LSTM model for predicting FAGC, optimizing the LSTM model by a new evolutionary algorithm called the marine predators algorithm (MPA), and considering the six new inputs in the modeling process, such as aggregate to total mass ratio, fine aggregate to total aggregate mass ratio, FASiO2:Al2O3 molar ratio, FA SiO2:Fe2O3 molar ratio, AA Na2O:SiO2 molar ratio, and the sum of SiO2, Al2O3, and Fe2O3 percent in FA. The performance capacity of LSTM-MPA was evaluated with other artificial intelligence models. The results indicate that the R2 and RMSE values for the proposed LSTM-MPA model were as follows: MLPNN (R2 = 0.896, RMSE = 3.745), BRNN (R2 = 0.931, RMSE = 2.785), GFFNN (R2 = 0.926, RMSE = 2.926), SVR-L (R2 = 0.921, RMSE = 3.017), SVR-P (R2 = 0.920, RMSE = 3.291), SVR-S (R2 = 0.934, RMSE = 2.823), SVR-RBF (R2 = 0.916, RMSE = 3.114), DT (R2 = 0.934, RMSE = 2.711), RF (R2 = 0.938, RMSE = 2.892), LSTM (R2 = 0.9725, RMSE = 1.7816), LSTM-MPA (R2 = 0.9940, RMSE = 0.8332), and LSTM-PSO (R2 = 0.9804, RMSE = 1.5221). Therefore, the proposed LSTM-MPA model can be employed as a reliable and accurate model for predicting CSFAG. Noteworthy, the results demonstrated the significance and influence of fly ash and sodium silicate solution chemical compositions on the compressive strength of FAGC. These variables could adequately present variations in the best mix designs discovered in earlier investigations. The suggested approach may also save time and money by accurately estimating the compressive strength of FAGC with low calcium content.

Compressive strength prediction of fly ash and blast furnace slag-based geopolymer concrete using convolutional neural network

Prediction of Compressive Strength of Glass Powder Concrete Based on Artificial Intelligence

Prediction of Mechanical Properties of Fly-Ash/Slag-Based Geopolymer Concrete Using Ensemble and Non-Ensemble Machine-Learning Techniques

Prediction of Geopolymer Concrete Compressive Strength Using Convolutional Neural Networks

Utilizing an enhanced machine learning approach for geopolymer concrete analysis

Prediction of the compressive strength of Flyash and GGBS incorporated geopolymer concrete using artificial neural network

Compressive strength optimization and life cycle assessment of geopolymer concrete using machine learning techniques

Prediction of Geopolymer Concrete Compressive Strength Using Novel Machine Learning Algorithms

Application of optimization‐based estimation analysis for predicting the compressive strength of eco‐friendly modified geopolymer concrete

Application of Machine Learning Approaches to Predict the Strength Property of Geopolymer Concrete

Predicting compressive strength of geopolymer concrete using machine learning

Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite

Bayesian Regularized Artificial Neural Network Model to Predict Strength Characteristics of Fly-Ash and Bottom-Ash Based Geopolymer Concrete

Machine Learning to Predict Workability and Compressive Strength of Low- and High-Calcium Fly Ash–Based Geopolymers

Support vector regression (SVR) and grey wolf optimization (GWO) to predict the compressive strength of GGBFS-based geopolymer concrete

Mechanical Framework for Geopolymer Gels Construction: An Optimized LSTM Technique to Predict Compressive Strength of Fly Ash-Based Geopolymer Gels Concrete

Influence of treated recycled concrete aggregate and modified mixing approach on the mechanical properties of ternary blend geopolymer concrete: Experiments and machine learning algorithms

Study on Self Compacting Geopolynmer Concrete

Data‐driven approach for investigating and predicting of compressive strength of fly ash–slag geopolymer concrete

Prediction of the Compressive Strength of Fly Ash Geopolymer Concrete by an Optimised Neural Network Model

Estimation of compressive strength of waste concrete utilizing fly ash/slag in concrete with interpretable approaches: optimization and graphical user interface (GUI)