Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Predicting the compressive strength of steelmaking slag concrete with machine learning – Considerations on developing a mix design tool

Machine Learning-Based Probabilistic Predictions for Concrete Filled Steel Tube (CFST) Column Axial Capacity

Forecasting the strength of micro/nano silica in cementitious matrix by machine learning approaches

Comparison of machine learning techniques to predict the compressive strength of concrete and considerations on model generalization

Application of Advanced Machine Learning Approaches to Predict the Compressive Strength of Concrete Containing Supplementary Cementitious Materials

Machine Learning Modeling Integrating Experimental Analysis for Predicting Compressive Strength of Concrete Containing Different Industrial Byproducts

Intelligent Design of Construction Materials: A Comparative Study of AI Approaches for Predicting the Strength of Concrete with Blast Furnace Slag

Efficient Compressive Strength Prediction of Alkali-Activated Waste Materials Using Machine Learning

Machine Learning-Based Compressive Strength Prediction for Concrete: an Adaptive Boosting Approach

Robust extreme gradient boosting regression model for compressive strength prediction of blast furnace slag and fly ash concrete

Metaheuristic optimization of machine learning models for strength prediction of high-performance self-compacting alkali-activated slag concrete

Predicting Compressive Strength of Concrete Containing Industrial Waste Materials: Novel and Hybrid Machine Learning Model

Machine learning and interactive GUI for concrete compressive strength prediction

Compressive Strength of Steel Fiber-Reinforced Concrete Employing Supervised Machine Learning Techniques

Estimating the mechanical properties of high-performance concrete via automated and ensembled machine learning methods

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

Machine Learning Prediction Models to Evaluate the Strength of Recycled Aggregate Concrete

Predicting compressive strength of high-performance concrete with high volume ground granulated blast-furnace slag replacement using boosting machine learning algorithms

Virtual Mix Design: Prediction of Compressive Strength of Concrete with Industrial Wastes Using Deep Data Augmentation

Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using a novel regularized deep learning approach