Abstract:Layer-structured Na intercalation compounds such as Na x MO 2 (M=Co, Mn, Cr) have attracted much attention as cathode materials for sodium-ion batteries due to their high volumetric and gravimetric energy densities. Among them, NaCrO 2 with layered rock salt structure is one of the promising cathodes since NaCrO 2 has a desirable flat and smooth charge/discharge voltage plateau. 1 In addition, NaCrO 2 has the highest thermal stability at charged state which makes it a potentially safer cathode material. 2 The NaCrO 2 exhibits a reversible capacity of 110 mAh g -1 with good cycling performance. 3 However, the transition metal oxide (TMO) cathode materials in NIBs undergo severe chemo-mechanical deformations which leads to capacity fade and poor cycling and is the limiting factor of NIBs. The electrochemical characterization and examination of the electrode structure were the primary focus of several investigations. To improve the lifespan and performance of electrode materials for Na-ion batteries, it is vital to comprehend how Na ions impact the chemo-mechanical stability of the electrodes. In this talk, we will discuss the driving forces behind the structural and interfacial deformations on NaCrO 2 cathodes. Digital image correlation measurements were conducted to probe strain evolution in the electrode during cycling. The free-standing composite NaCrO 2 electrode was used for stain measurements in custom-cell assembly. The battery was cycled against Na metal in 1 M NaClO 4 in PC. The first part of the study involves structural and interfacial deformations in the lower voltage range of 2.3 V to 3.5 V where x0.5 in Na x CrO 2 . In the preliminary studies, we observed that the initial insertion of Na ions leads to negative strain evolution (contraction) in the electrode, followed by expansions in the electrode at a higher state of discharge. Similar phenomena are also observed during charge cycles, where extraction of Na results in an initial contraction in the electrode, followed by expansion at a higher state of charge. Understanding the mechanisms behind chemo-mechanical deformations will allow to tune structure & material property for better electrochemical performance. Acknowledgement: This work is supported by National Science Foundation’s (NSF) Faculty Early Career Development (CAREER) Program, 2142726. References: Bo SH, Li X, Toumar AJ, Ceder G. Layered-to-rock-salt transformation in desodiated Na x CrO2 (x 0.4). Chemistry of Materials. 2016 Mar 8;28(5):1419-29. Xia X, Dahn JR. NaCrO2 is a fundamentally safe positive electrode material for sodium-ion batteries with liquid electrolytes. Electrochemical and Solid-State Letters. 2011 Nov 18;15(1): A1. Komaba S, Takei C, Nakayama T, Ogata A, Yabuuchi N. Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2. Electrochemistry Communications. 2010 Mar 1;12(3):355-8.

O3-Type NaCrO 2 as a Superior Cathode Material for Sodium/Potassium-Ion Batteries Ensured by High Structural Reversibility

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Self-Template Synthesis of NaCrO 2 Submicrospheres for Stable Sodium Storage

Suppressing O3−O’3 phase transition in NaCrO2 cathode enabling high rate capability for sodium-ion batteries by Sb substitution

A High-Performance Layered Cr-Based Cathode for Sodium-Ion Batteries

Sodium-deficient O3-type Na0.83Cr1/3Fe1/3Mn1/6Ti1/6O2 As a New Cathode Material for Na-ion Batteries

A P2/O3 biphasic cathode material with highly reversibility synthesized by Sn-substitution for Na-ion batteries

Unprecedented Cyclability and Moisture Durability of NaCrO2 Sodium-Ion Battery Cathode via Simultaneous Al Doping and Cr2O3 Coating.

Cation-Disordered O3-Na 0.8 Ni 0.6 Sb 0.4 O 2 Cathode for High-Voltage Sodium-Ion Batteries

One‐step surface‐to‐bulk modification of NaCrO2 cathode for durable sodium ion batteries

Sodium Storage Property and Mechanism of NaCr1/4Fe1/4Ni1/4Ti1/4O2 Cathode at Various Cut-off Voltages

Self-Template Synthesis of NaCrO2 Submicrospheres for Stable Sodium Storage

A Multielectron-Reaction and Low-Strain Na 3.5 Fe 0.5 VCr 0.5 (PO 4 ) 3 Cathode for Na-Ion Batteries

A High-Rate, Durable Cathode for Sodium-Ion Batteries: Sb-Doped O3-Type Ni/Mn-Based Layered Oxides.

Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion Batteries

Depressed P3-O3' phase transitions in O3-type layered cathode for advanced sodium-ion batteries

Layered-to-Rock-Salt Transformation in Desodiated NaCrO2

In Operando Strain Evolution in Sodium Chromium Oxide Cathode for Na-Ion Batteries during Battery Cycling

P3/O3 Integrated Layered Oxide as High‐Power and Long‐Life Cathode toward Na‐Ion Batteries

O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries

Regulating Phase Transition and Oxygen Redox to Achieve Stable High‐Voltage O3‐Type Cathode Materials for Sodium‐Ion Batteries