O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries

Xiaomeng Meng,Ding Zhang,Zhuangzhuang Zhao,Yunfei Li,Shoudong Xu,Liang Chen,Xiaomin Wang,Shibin Liu,Yucheng Wu

DOI: https://doi.org/10.1016/j.jallcom.2021.161366

IF: 6.2

2021-12-01

Journal of Alloys and Compounds

Abstract:O3-type transition metal oxides as the cathodes for Na-ion batteries have attracted extensive attention owing to their high theoretical specific capacity and ease of synthesis. This work indicates enhanced electrochemical reversibility and improved air stability via a rational Zn2+ doping for O3-NaNi0.5Mn0.5O2. It exhibits a discharge capacity of 113 mAh g−1 at 0.5 C, excellent capacity retention of 80% after 150 cycles, and the capability to release a capacity of 82 mAh g−1 at 5 C in the voltage range of 2–4 V. The doped cathode undergoes a phase transition of O3-O3/O′3-P3-P′3-O''3 with a small volume change of approximately 2.00% in the voltage range of 2–4 V, and a subsequent slight structural change in the high voltage range of 4–4.2 V, which well demonstrates the enhanced cyclic stability. The assembled full cell confirms the feasibility of applying O3-type NaNi0.47Zn0.03Mn0.5O2 cathode for Na-ion batteries. Thus, the work suggests an efficient strategy to better release the potential of high-energy cathode for Na-ion batteries.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper primarily explores the application of O3-type transition metal oxides as cathode materials for sodium-ion batteries and improves the electrochemical reversibility and air stability of O3-NaNi0.5Mn0.5O2 materials through reasonable zinc (Zn) doping. Specifically, the paper addresses the following key issues:

1. **Enhancing Electrochemical Performance**: By incorporating an appropriate amount of Zn2+ into O3-NaNi0.5Mn0.5O2, researchers successfully improved the material's discharge capacity (reaching 113mAh/g at 0.5C), excellent capacity retention rate (maintaining 80% after 150 cycles), and high-rate capacity release capability (releasing 82mAh/g at 5C).

2. **Improving Reversibility in High Voltage Range**: Through Zn doping, the research team found that the material exhibited almost completely symmetrical redox peaks in the high voltage range (4-4.2V), indicating excellent electrochemical reversibility in this voltage range.

3. **Minimizing Volume Change**: In the voltage range of 2-4V, the doped material underwent a phase transition process (O3-O3'/O3-P3-P3'-O3'') accompanied by relatively small volume changes (about 2.00%). This low volume change is crucial for ensuring the stability of the material during cycling.

4. **Enhancing Air Stability**: Compared to the undoped sample, the Zn-doped sample maintained high charge-discharge capacity, stable coulombic efficiency, and cycling stability even after exposure to air. This indicates that Zn doping helps improve the material's stability in humid environments.

5. **Validation in Full Cell Applications**: By using the doped material as the cathode material for sodium-ion batteries and combining it with hard carbon as the anode material, the assembled full cell demonstrated good electrochemical performance, including maintaining 73% of the initial energy density after 50 cycles.

In summary, this paper proposes a method to improve O3-NaNi0.5Mn0.5O2 materials through reasonable Zn2+ doping, which not only enhances their electrochemical performance in sodium-ion batteries but also improves their air stability, providing valuable guidance for designing high-performance cathode materials for sodium-ion batteries.