Abstract:This work adopts a dual‐site substitution strategy to enhance the bulk and interfacial stability of O3‐NaNi0.5Mn0.5O2 cathode. The prepared cathode delivers high stability during repeated electrochemical cycles. The introduction of K/Ti can effectively suppress multiple phase transitions, reduce the Na+ vacancy formation energy, induce the formation of a NaF‐rich, thin but stable CEI layer, and improve air stability. High‐capacity O3‐type layered sodium oxides are considered one of the most promising cathode materials for the next generation of Na‐ion batteries (NIBs). However, these cathodes usually suffer from low high‐rate capacity and poor cycling stability due to structure deformation, native air sensitivity, and interfacial side reactions. Herein, a multi‐site substituted strategy is employed to enhance the stability of O3‐type NaNi0.5Mn0.5O2. Simulations indicate that the Ti substitution decreases the charge density of Ni ions and improves the antioxidative capability of the material. In addition, the synergistic effect of K+ and Ti4+ significantly reduces the formation energy of Na+ vacancy and delivers an ultra‐low lattice strain during the repeated Na+ extraction/insertion. In situ characterizations verify that the complicated phase transformation is mitigated during the charge/discharge process, resulting in greatly improved structure stability. The co‐substituted cathode delivers a high‐rate capacity of 97 mAh g−1 at 5 C and excellent capacity retention of 81% after 400 cycles at 0.5 C. The full cell paired with commercial hard carbon anode also exhibits high capacity and long cycling life. This dual‐ion substitution strategy will provide a universal approach for the new rational design of high‐capacity cathode materials for NIBs.

Zr-doped O3-type NaNi1/3Fe1/3Mn1/3O2 Cathodes with Enhanced Structure Stability for Sodium-Ion Batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Toward high stability of O3‐type NaNi1/3Fe1/3Mn1/3O2 cathode material with zirconium substitution for advanced sodium‐ion batteries

Mitigating the Voltage Fading and Lattice Cell Variations of O3-NaNi0.2Fe0.35Mn0.45O2 for High Performance Na-ion Battery Cathode by Zn Doping

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

Enhanced stability and electrochemical performance of O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material via yttrium doping for advanced sodium-ion batteries

O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

Core–Shell Structure and X‐Doped (X = Li, Zr) Comodified O3‐NaNi0.5Mn0.5O2: Excellent Electrochemical Performance As Cathode Materials of Sodium‐Ion Batteries

High-entropy configuration of O3-type layered transition-metal oxide cathode with high-voltage stability for sodium-ion batteries

Enhanced Na-storage properties of O3-type NaNi0.5Mn0.5O2 cathodes by doping and coating dual-modification strategy

A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries

Effect of Ti doping on the structural and electrochemical performance of O3-type Na(Ni0.3Fe0.2Mn0.5)1-xTixO2 cathode materials for sodium-ion batteries

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries.

Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery

High stability of Cu-doped O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material for sodium-ion battery

Multi-element doped hexagonal sheet Ni/Mn-based layered oxide with ZrO2 surface modification for sodium ion batteries cathode with high capacity and good cycle/air stability

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

Enhanced Cyclability of O3-NaNi 0.33 Fe 0.31 Mn 0.36 O 2 by Mg and Cu Synergistic Doping with Strengthened Mn-O Bonds

NaTi2(PO4)3 modified O3-type NaNi1/3Fe1/3Mn1/3O2 as high rate and air stable cathode for sodium-ion batteries