Abstract:a r t i c l e i n f o Sodium Na-ion battery We report a new layered Na(Mn 0.25 Fe 0.25 Co 0.25 Ni 0.25)O 2 compound with O3 oxygen stacking. It delivers 180 mAh/g initial discharge capacity and 578 Wh/kg specific energy density with good cycling capability at high cutoff voltage. In situ X-ray diffraction (XRD) shows a reversible structure evolution of O3-P3-O3′-O3″ upon Na de-intercalation. The excellent capacity and cycling performance at high cutoff voltage make it an important model system for studying the general issue of capacity fading in layered Na cathode compounds. Layered sodium metal oxides have attracted considerable interest as cathodes for Na-ion batteries partly due to the fact that all seven layered NaTMO 2 with the O3-structure, where TM is a single oxidizable 3d transition metal ion from Ti, V, Cr, Mn, Fe, Co, Ni [1], can be easily synthesized , and show the capability to intercalate Na ions reversibly [2–7]. This is very different from their Li analogues, where only LiCoO 2 and LiNiO 2 reversibly intercalate Li ions [8]. Furthermore, different transition metal ions can be easily mixed in the TM layer to make new NaTMO 2 compounds [9–15]. Among them, O3-Na(Fe 0.5 Co 0.5)O 2 (denoted hereafter as FC) shows a capacity around 160 mAh/g with excellent capacity retention when cycled below 4.0 V and an average voltage of 3.14 V [11]. O3-Na(Ni 0.5 Mn 0.5)O 2 (denoted hereafter as NM) shows an initial discharge capacity of 185 mAh/g and average voltage of 3.22 V, partly due to a long high voltage plateau around 4.0 V [12,16]. But capacity retention of NM is poor if the 4.0 V plateau is included in the galvanostatic cycling. We report here in this communication a new quaternary O3-structured compound with composition Na(Mn 0.25 Fe 0.25 Co 0.25 Ni 0.25)O 2 (denoted hereafter as MFCN), with theoretical capacity of 239 mAh/g and initial discharge capacity of 180 mAh/g over an average discharge voltage of 3.21 V. More importantly, its capacity retention is significantly improved over NM and FC even when cycled with high charge voltage cutoff. In-situ lab X-ray diffraction (XRD) to reveal the structure evolution of MFCN in the first electrochemical cycle shows a reversible O3-P3-O3′-O3″ phase transformation. Our result shows the opportunity to further improve the electrochemical performance of layered NaTMO 2 compounds by designing new combinations of transition metal ions …

Enhanced Cyclability of O3-NaNi 0.33 Fe 0.31 Mn 0.36 O 2 by Mg and Cu Synergistic Doping with Strengthened Mn-O Bonds

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

High stability of Cu-doped O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material for sodium-ion battery

Enhancing the Cycling and Rate Performance of NaNi1/3Fe1/3Mn1/3O2 Cathodes by La/Al Codoping

Enhanced Na-storage properties of O3-type NaNi0.5Mn0.5O2 cathodes by doping and coating dual-modification strategy

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

Stabilized O3‐Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual‐Site Ti4+/K+ Substitution

F-doped O3-NaNi1/3Fe1/3Mn1/3O2 as high-performance cathode materials for sodium-ion batteries

NaTi2(PO4)3 modified O3-type NaNi1/3Fe1/3Mn1/3O2 as high rate and air stable cathode for sodium-ion batteries

Zr-doped O3-type NaNi1/3Fe1/3Mn1/3O2 Cathodes with Enhanced Structure Stability for Sodium-Ion Batteries

Preparation and Property Optimization of High Capacity O3-type NaNi0.4Fe0.2Mn0.4O2

Co 0 . 25 Ni 0 . 25 ) O 2 : A quaternary layered cathode compound for rechargeable Na ion batteries

Multi-element doped hexagonal sheet Ni/Mn-based layered oxide with ZrO2 surface modification for sodium ion batteries cathode with high capacity and good cycle/air stability

Enhancing the Cycling and Rate Performance of NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Cathodes by La/Al Codoping

Enhanced stability and electrochemical performance of O3-type NaNi1/3Fe1/3Mn1/3O2 cathode material via yttrium doping for advanced sodium-ion batteries

Copper and Zirconium Codoped O3-Type Sodium Iron and Manganese Oxide as the Cobalt/Nickel-Free High-Capacity and Air-Stable Cathode for Sodium-Ion Batteries

NaTiOx‐modified high‐nickel layered oxide cathode for stable sodium‐ion batteries

A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries

Elucidating the Structural Evolution of O3-type NaNi1/3Fe1/3Mn1/3O2: A Prototype Cathode for Na-Ion Battery.