Abstract:This study focuses on catalytic co-pyrolysis of a lignocellulosic biomass (rice husk) and main components of the seaweed Enteromorpha clathrata (ie, protein, polysaccharide, and ash) using TGA and Py-GC/MS analytical techniques with the aim and novelty to unveil their catalytic co-pyrolysis thermal behaviors and synergistic effect of interactions between their catalytic co-pyrolysis volatiles for enhanced biofuels and high-valued chemicals production. Thus, in this study, rice husk was treated with macroalgal major components over ZSM-5, MCM-41, and blend of both catalysts using the Py-GC/MS analytical technique to improve the quality of rice husk bio-oil. Thermogravimetric analysis studies of pyrolysis, co-pyrolysis, and catalytic co-pyrolysis of lignocellulosic biomass with seaweed main components were also performed. Effects of HZSM-5, MCM-41, and blend of both catalysts on catalytic co-pyrolysis products distributions were also studied and compared. Results revealed that the quality and chemical compositions of rice husk bio-oil were significantly improved owing to the synergistic effect of interactions between volatiles of rice husk and seaweed main components during catalytic co-pyrolysis. Also, catalytic co-pyrolysis of macroalgal components and lignocellulosic biomass with ZSM-5, MCM-41, and blends of both catalysts were found to considerably reduce the oxygenated compounds, and greatly improved selectivity of monocyclic aromatic hydrocarbons in the bio-oil. However, MCM-41 offered a stronger positive upgrading effect than ZSM-5 catalyst. This could be attributed to its greater ability in raising the selectivity of aromatic hydrocarbons and reduction of activation energies of the degradation reactions. It was also observed that blends of both catalysts offered a higher upgrading effect than ZSM-5 and MCM-41 catalysts alone. Novelty StatementCatalytic c-pyrolysis of macroalgal components and lignocellulosic biomass with ZSM-5, MCM-41, and blends of these catalysts greatly improved selectivity of monocyclic aromatic hydrocarbons in the bio-oil.MCM-41 offered a stronger positive upgrading effect than ZSM-5 in raising the selectivity of aromatic hydrocarbons and reduction of activation energies.Blends of both catalysts offered a higher upgrading effect than ZSM-5 and MCM-41 catalysts alone. HighlightsCatalytic co-pyrolysis of lignocellulosic biomass with major macroalgal components was performed.Synergistic effect of catalytic co-pyrolysis of lignocellulosic biomass & macroalgal components were unveiled.Effect of HZSM-5 & MCM-41 catalysts on product distributions were studied & compared.Thermal behaviors and mass loss characteristics of degradation processes were unveiled.

Pyrolysis of Rice husk, Coconut shell, and Cladophora glomerata algae and application of the produced biochars as support for cobalt catalyst in Fischer–Tropsch synthesis

Fischer–Tropsch Synthesis: Higher Oxygenate Selectivity of Cobalt Catalysts Supported on Hydrothermal Carbons

Catalytic Performance of Alumina-Supported Cobalt Carbide Catalysts for Low-Temperature Fischer–Tropsch Synthesis

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Study on Reduction Property of Cobalt Based F-T Synthesis \catalyst Supported on Alumina

Fischer‐Tropsch Synthesis by a Cobalt‐Based Carbon Aerogel Catalyst

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance

Catalytic hydrothermal liquefaction of microalgae over different biochars

Cobalt-Based Fischer–Tropsch Synthesis: A Kinetic Evaluation of Metal–Support Interactions Using an Inverse Model System

Kinetic estimation of Fischer–Tropsch synthesis using biogas-derived feedstocks over Ni/Al2O3 catalyst

Novel Cobalt Catalysts Supported On Metal-Organic Frameworks Mil-53(Al) For The Fischer-Tropsch Synthesis

Influence of temperature during pyrolysis of Fe-alginate: Unraveling the pathway towards highly active Fe/C catalysts

Insight into the Physicochemical Properties of Co-Based Catalysts in Fischer–Tropsch Synthesis

Exploring the influence of different precursor materials on the catalytic performance and deactivation characteristics of iron-loaded biochar catalysts for the catalytic cracking of toluene

Catalytic co‐pyrolysis of macroalgal components with lignocellulosic biomass for enhanced biofuels and high‐valued chemicals

Classifying and understanding the role of carbon deposits on cobalt catalyst for Fischer-Tropsch synthesis

Recent advances in cobalt-based Fischer-Tropsch synthesis catalysts

Porous Carbon-Supported Cobalt Catalyst for CO Hydrogenation to Gasoline Range Hydrocarbons

Effect of a Carbon Promoter on the Properties of a Co/MgAlO4 Catalyst for Fischer–Tropsch Synthesis

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis

θ-Fe3C dominated Fe@C core–shell catalysts for Fischer-Tropsch synthesis: Roles of θ-Fe3C and carbon shell