Abstract:In order to illustrate the importance of a coupling effect in the physical-chemical structure of char-based catalysts on in-situ biomass tar reforming, three typical char-based catalysts (graphite, Zhundong coal char, and sawdust biochar) were studied in the fixed-bed/fluidized-bed reactor. The physical-chemical properties of carbon-based catalysts associated with their catalytic abilities were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscope-energy dispersive spectrometer (SEM-EDS) and N2 adsorption. The relationship between the specific reactivity and tar reforming ability of carbon-based catalysts was discussed through a micro fluidized bed reaction analyzer (MFBRA-MR). The results indicate that the char-based catalyst has a certain removal ability for in-situ biomass tar of corn straw in an inert atmosphere, which is as follows: sawdust biochar > Zhundong (ZD) coal char > graphite. During the in-situ tar reforming, the alkali and alkaline earth metal species (AAEMs) act as adsorption/reaction sites, affecting the evolution of the aromatic ring structure and oxygen-containing functional groups of the char-based catalyst, and also its pore structure. AAEM species on the surface of char-based catalysts are the active sites for tar reforming, which promotes the increase of active intermediates (C-O bond and C-O-AAEMs), and enhances the interactions between char-based catalysts and biomass tar. The abundant AAEMs may lead to the conversion of O=C-O and C=O to C-O. For tar reforming, the internal pore structure of char-based catalysts is little changed, mainly with the carbon deposit forming on the surface pore structure. The carbon deposit from the reformation of straw tar on the char surface has better reactivity than the inherent carbon structure of ZD coal char and sawdust biochar. There is a positive relationship between the MFBRA-MR specific reactivity and tar catalytic reforming ability of char-based catalysts (decided by the coupling effect in their physical-chemical structure), which can be used to determine the catalytic ability of char-based catalysts on tar reforming directly.

Exploring the influence of different precursor materials on the catalytic performance and deactivation characteristics of iron-loaded biochar catalysts for the catalytic cracking of toluene

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Evaluation of the catalytic performance of different activated biochar catalysts for removal of tar from biomass pyrolysis

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Mechanism study of toluene removal using iron/nickel bimetallic catalysts supported on biochar

Efficient and stable Fe-Ce-Al catalyst for catalytic deoxygenation of lignin for phenol and hydrocarbon-rich fuel: Effect of the synthesis method

Preparation of High Catalytic Activity Biochar from Biomass Waste for Tar Conversion

Evolution Of Char Structure During In-Situ Biomass Tar Reforming: Importance Of The Coupling Effect Among The Physical-Chemical Structure Of Char-Based Catalysts

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Ferric sludge derived pyrolyzed-hydrochar supported iron catalysts for catalytic cracking of toluene

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Preparation of Fe-based catalysts from waste biomass as a carbon carrier and its catalytic performance in CO2 hydrogenation

Preparation of highly dispersed lignite-char-supported cobalt catalyst for stably steam reforming of biomass tar at low temperature

Catalytic Upgrading of Coal Pyrolysis Volatiles by Porous Carbon Materials Derived from the Blend of Biochar and Coal

The effects of pore structures and functional groups on the catalytic performance of activated carbon catalysts for the co-pyrolysis of biomass and plastic into aromatics and hydrogen-rich syngas

Effect of Biochar Support on the Catalytic Performance of Fe-based Catalysts for CH4 Cracking

Mechanism of in-situ dynamic catalysis and selective deactivation of H2O-activated biochar for biomass tar reforming

In-depth understanding of the synergistic effect in catalytic copyrolysis of lignin-plastic mixtures with lignin-tailored hierarchical HZSM‐5 catalysts

Preparation of Metal-Modified Carbon-Based Catalyst and Experimental Study on Catalytic Pyrolysis of Distillers Dried Grains with Solubles

Mechanism of Catalytic Tar Reforming over Biochar: Description of Volatile-H2o-char Interaction

Performance of biochar as a catalyst for tar steam reforming: Effect of the porous structure