Abstract:Nowadays, heat dissipation methods of single-phase air cooling or liquid cooling, such as natural convection and forced convection, are unable to meet the high heat flux density dissipated by the heat exchange components of the thermal management system in many relevant fields, such as energy, electronic, and chemical engineering industries. With the recent increase in the power density consumption and miniaturization trend of various equipments, the compactness and efficiency of heat exchangers are becoming increasingly demanding. Compared to conventional channels, heat sinks fabricated using micro-scale channels have a compact structure, higher surface area-to-volume ratio, and heat transfer coefficient, together with less demand for the working fluid and the pumping power supply, which have been gradually paid attention to as remarkable cooling scheme candidates for applications in modern-day and next-generation electronic elements. Recently, the rapid development of the surface modification technology has prompted the development of heat transfer surfaces with micro- or nano-scale structures ranging from a few micrometers to tens of nanometers, which can enhance the boiling heat transfer coefficient and critical heat flux. Therefore, the combination of structured surface and microchannel flow boiling is a highly promoted method of achieving a higher heat transfer performance. Nanowire is one of the micro-structures that can enhance boiling heat transfer. Previous experimental results showed that a nanowire-structured surface could increase the nucleate site density and enhance the capillary wicking process, thereby achieving a higher heat transfer coefficient and a critical heat flux. Herein, TiC nanowires were synthesized on a titanium wafer surface through the electro-deposition method. The diameters of the two types of nanowires were approximately 230 and 535 nm, and their heights were 4 and 12 mu m, respectively. The nanowires were staggered and closely arranged on the surface, forming micro-/nano-scaled gaps. The static contact angles were 150 degrees and 154 degrees, respectively. An experiment of subcooled vertical flow boiling on nanowire surfaces in a narrow rectangular microchannel was conducted using a high-speed camera. The working fluid was deionized water. The channel cross-section was 0.5 mm x 5 mm. The mass fluxes of the subcooled flow boiling were 200 and 300 kg/(m(2) s). The heat flux was in the 20-200 kW/m(2) range. The experiment was conducted under atmospheric pressure, with a subcooled degree of 10 K. The slopes of the boiling curves on the two surfaces were both negative near the ONB points and changed to positive with the increasing heat flux. The single-phase heat transfer performance on the 12-mu m-height nanowire surface was better than that on the 4-mu m-height nanowire surface. The 4-mu m-height nanowire surface in the two-phase condition had higher heat transfer coefficients. However, the heat transfer deterioration only occurred on the 4-mu m-height nanowire surface at a high heat flux. Thus, the heat transfer performance on the 12-mu m-height nanowire surface was better at a high heat flux. The two-phase periodic flow pattern on the 4-mu m-height nanowire surface was "elongated bubble-expanding to upstream and downstream-local dryout-rewetting". The main flow pattern on the 12-mu m-height nanowire surface was bubble coalescence and elongating to downstream.

Numerical simulation of a heater wire behavior under film boiling

Numerical simulation of wire temperature field for prediction of wire transfer stability in laser hot wire welding

Subcooled Boiling-Induced Vibration of a Heater Rod Located Between Two Metallic Walls

Experiments on heat transfer of smooth and swirl tubes under one-sided heating conditions

Numerical Computation of Coupled Electromagnetic-Thermal Field in an Induction Edge Heater for the Hot Strip Mill

Subcooled boiling-induced vibration of a single heater rod confined with metallic walls

Thermal Interaction of Boiling Nucleate Sites on a Heating Wire

Molecular dynamics simulation on liquid nanofilm boiling over vibrating surface

Infrared camera-based analysis of heat flux distribution in film boiling of water flow over a moving steel sheet

Numerical study on temperature and thermal stress behaviors in silicon carbide heating elements within high-temperature annealing furnaces

Numerical simulation of boiling behavior in vertical microchannels

Numerical Simulation of Bubble Growth and Heat Transfer During Flow Boiling in a Surface-Modified Microchannel

ICONE19-43746 DEFORMATION OF LONG SIMULATED FUEL ROD WITH ELECTRIC HEATING

Flow and Heat Transfer Characteristics of Subcooled Flow Boiling on Nanowires Surfaces in a Narrow Microchannel

Three-dimensional simulation of film boiling on a horizontal surface with magnetic field

Experimental Study on Flow Boiling Heat Transfer of High-Pressure Water in Microtube with Coiled Wire Inserted

Numerical Simulation of Single Bubble Dynamics During Flow Boiling Conditions on a Horizontal Surface

Numerical simulation analysis of high-temperature bent sodium heat pipes

Heat Transfer and Visualization of Flow Boiling on Nanowire Surfaces in the Microchannel

Three-dimensional CFD simulation of geyser boiling in high-temperature sodium heat pipe

Numerical study on heat transfer characteristics of molten salt in annular channel with wire coil