Abstract:Templating platinum group metal (PGM) nanostructures from microphase separated block copolymers (BCPs) allows for electrocatalytic activity to be studied on highly ordered, model surfaces with precisely controlled feature sizes and morphologies, thereby allowing catalyst electroactivity and stability to be probed as a function of nanoscale geometry. In our previous work [1], BCP templated electrocatalysts fabricated via incipient wetness impregnation of PGM precursors were tested for hydrogen oxidation/evolution and water-splitting activity on interdigitated electrodes using liquid and solid polymer electrolytes. This talk presents the fabrication of such electrocatalysts via Atomic Layer Deposition (ALD) and Physical Vapor Deposition (PVD) techniques (e-beam evaporation and sputtering). Self-assembled lamellae of poly-(styrene-block-methylmethacrylate) (PSbPMMA) thin films on Si wafer and glassy carbon substrates were subjected to 5 - 15 ALD cycles with trimethylaluminium (TMA) precursor to induce selective growth of alumina in the PMMA domains via Sequential Infiltration Synthesis. Thereafter, the polymer template was removed via Reactive Ion Etching (RIE) with oxygen plasma. The resultant alumina nanostructures templated from self-assembled PSbPMMA was then used as a substrate either for Platinum ALD with (trimethyl)methylcyclopentadienylplatinum(IV) precursor atop a Titanium Nitride adhesive layer, or for sputtering of Pt atop a Ti adhesive layer to obtain conformal Pt coatings of up to 20 nm in thickness. When e-beam evaporation was used, The PMMA domains were selectively removed by successive wet and dry etch steps, followed by deposition and lift-off. The PGM electrocatalyst nanostructures were characterized via a combination of electron microcopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and the Pt content of the catalysts were determined via microwave leaching and digestion of the electrocatalyst thin film followed by Inductively Coupled Plasma Mass Spectroscopy. The nanostructured electrocatalysts were tested for oxygen reduction (ORR) activity in a conventional rotating disk electrode setup using 0.1 M perchloric acid electrolyte, and the ORR mass activities and active surface area were obtained. [1] Bhattacharya, D., Arges, C. G., et al., Small, 2021, 17, 2100437

Microporous Ag/AgCl on a Titanium Scaffold for Use in Capillary Reference Electrodes

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Multielectrode Arrays at Wafer-Level for Miniaturized Sensors Applications: Electrochemical Growth of Ag/AgCl Reference Electrodes

Fabrication of Electrodes by Deposition of Lead Clusters from the Matrix Assembly Cluster Source (MACS) into Porous Carbon Paper for Electrocatalysis

An electroplated Ag/AgCl quasi-reference electrode based on CMOS top-metal for electrochemical sensing

A flexible Ag/AgCl micro reference electrode based on a parylene tube structure.

Construction and Evaluation of Cheap and Robust Miniature Ag/AgCl Reference Electrodes for Aqueous and Organic Electrolytes

A comparative study on fabrication techniques for on-chip microelectrodes

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

Fabrication and Electrochemical Properties of Novel Nanoporous Platinum Network Electrodes

Study of a novel fabrication method of 3D Ag-based nanoporous structures for electrochemical detection

A Study of the Long-Term Electrochemical Stability of Thin-Film Titanium–Platinum Microelectrodes and Their Comparison to Classic, Wire-Based Platinum Microelectrodes in Selected Inorganic Electrolytes

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Elevating Platinum to Volumetric Capacitance: High Surface Area Electrodes through reactive Pt sputtering

Manipulation of Pt∧Ag Nanostructures for Advanced Electrocatalyst

Fabrication of Block Copolymer Templated Extended Surface Model Electrocatalysts By Atomic Layer Deposition and Physical Vapor Deposition

Elucidating Interfacial Parameters of Platinum–Palladium Bulk Alloy Single Crystals

Direct Electrochemical Fabrication of Metallic Nanopillar Array on Au Electrode Surface by the Template Technique

A Novel Cytocompatible, Hierarchical Porous Ti6al4v Scaffold with Immobilized Silver Nanoparticles

Condensed Layer Deposition of Nanoscopic TiO2 Overlayers on High Surface Area Electrocatalysts

Print-and-plate architected electrodes for electrochemical transformations under flow