Abstract:Chemical mechanical planarization (CMP) is an integral part in semiconductor processing including the back-end-of-line (BEOL) step. A goal of CMP is to uniformly polish the metal interconnects and the liner/barrier materials while minimizing CMP-related defects such as pitting, dissolution, and galvanic corrosion. A variety of azoles are used as corrosion inhibitors such as benzotriazole (BTA) to prevent corrosion defects during polishing. [1,2] These azoles work together with particles in the slurries to polish the overplated metal forming the interconnects. However, azoles are very poorly biodegradable during wastewater treatment and highly toxic to the nitrification process, which requires expensive wastewater treatment challenges. [3,4] Also, it is known that the use of BTA leads to contamination of Cu films by forming undesirable hydrophobic organic residues (e.g., BTA and Cu-BTA complexes), [5] making their removal very difficult during cleaning. To address these challenges aliphatic amino acids were examined as potential corrosion inhibitors to replace problematic azoles in CMP slurries. Three amino acids were considered in a model CMP slurry. These three were chosen for their unique functional groups: methionine, containing a sulfur group, glutamic acid, having an extra carboxylic acid group, and leucine, having a branched hydrocarbon chain. A representative polishing slurry with 35 nm colloidal silica abrasives, 1 wt% hydrogen peroxide as an oxidizer, 0.5wt% arginine as a complexing agent, at pH 8 was used. Three experimental aims were considered (1) corrosion characterization of the three amino acid and BTA electrolytes with linear sweep voltammetry; (2) comparison of the Co and Cu metal removal rate (MRR) in polishing experiments with a proto-type CMP polisher with 8” wafers, and (3) oxidation of the amino acids and BTA in a Fenton assisted electrooxidation reaction. Methionine was most effective in controlling the galvanic corrosion of the Cu-Co couple. The Co and Cu MRR decreased in the presence of three amino acids and showed comparable removal selectivity. The forced degradation of the amino acids under the Fenton-assisted electrooxidation confirmed that they were more readily degraded compared to BTA. Acknowledgments : This work was supported by the Semiconductor Research Corporation grant (Task 3100.001) under the Global Research Collaboration program. References Seo, J., A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization. Journal of Materials Research 2021, 1-23. C. Peethala, H. P. Amanapu, U. Lagudu, and S.V. Babu, J. Electrochem. Soc, 159(6), H582-H588, 2012. D.E. Speed, Chapter 11, Advances in chemical mechanical planarization (CMP) 2nd edition, Babu, S. V., Ed. 2021. G. Li et al. / Chemosphere 241 (2020) 1249932. Seo, J.; Vegi, S. S. R. K. H.; Babu, S.V. ECS Journal of Solid State Science and Technology 2019, 8 (8), P379–P387.

Polyacrylic Acid as a Lubricant and a Complement to 1,2,4-Triazole for Copper Chemical Mechanical Polishing

Tribo-chemical Behavior of Copper in Chemical Mechanical Planarization

Environmentally Friendly Amino Acid-Based Polishing Slurry with Reduced Galvanic Corrosion at Copper/Cobalt Interface for Advanced Cu Interconnect Applications

Tribocorrosion Study of Copper During Chemical Mechanical Polishing in Potassium Periodate-Based Slurry

Passivation Kinetics of 1,2,4-Triazole in Copper Chemical Mechanical Polishing

Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI

1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing

Chemical processes in the chemical mechanical polishing of copper

Experimental and Computational Investigation of Complexing Agents on Copper Dissolution for Chemical Mechanical Polishing Process

Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry

Chemical effects on the tribological behavior during copper chemical mechanical planarization

Chemical Roles on Cu-slurry Interface During Copper Chemical Mechanical Planarization

Experimental and computational studies on TAD as an additive of copper chemical mechanical polishing

Investigation on the Mechanisms of Corrosion Inhibitor 5-aminotetrazole Used in the Copper Chemical Mechanical Polishing

An Efficient and High Quality Chemical Mechanical Polishing Method for Copper Surface in 3D TSV Integration

Material Removal Mechanism of Copper CMP from a Chemical–Mechanical Synergy Perspective

Mechanisms of Mixed Corrosion Inhibitors in Copper Chemical Mechanical Polishing

Mechanism of 1,2,4-Triazole During Copper Chemical Mechanical Planarization

Inhibitors for Organic Phosphonic Acid System Abrasive Free Polishing of Cu

Surface-initiated atom transfer radical polymerization of triazole monomer from copper surface and its anticorrosion performance

Chemical mechanical polishing for copper films in integrated circuit wiring layers using an advanced slurry