Abstract:Using steel slag to replace natural coarse and/or fine aggregates to make concrete provides a multi-win solution in mitigating the environmental problems regarding huge depletion of natural aggregates and disposal of large amount of slag. On the other hand, the use of pozzolanic fillers, such as fly ash (FA) and silica fume (SF) could significantly improve the strength, stiffness and durability of concrete. However, there were very few research studies on the effect of pozzolanic fillers on the mechanical behaviour and durability of concrete containing steel slag. To fill up this research gap and promote the use of steel slag, a systematic and scientific experimental study was conducted, in which 29 concrete mixes with steel slag partially or totally replacing natural aggregates and FA/SF partially replacing cement in an equal volume were prepared. The slump, wet packing density (WPD), 7-, 28-, 91- and 182-day compressive strength and durability in terms of total charge passed and chloride ion’s penetration depth in rapid chloride permeability test were tested for all the specimens while the chemical composition of concrete were tested using X-ray diffraction. Test results revealed that the slump of steel slag concrete decreased due to the porous structure of slag. Besides, the use of steel slag improved the compressive strength of concrete. By adding SF to replace partial cement, the strength of steel slag concrete could be escalated further. At given composition of aggregates and filler type, the total charge passed and the chloride ion’s penetration depth of steel slag concrete decreased as the WPD increased due to the denser and impermeable microstructure of concrete that enhanced the resistance of chloride ion penetrability.

Modification of ultrafine blast furnace slag with steel slag as a novel high-quality mineral admixture to prepare high-strength concrete

Effects on the Concrete Properties of That, the Natural Sand in Concrete is Replaced by the Blast Furnace Slag

Effect of blended steel slag–GBFS mineral admixture on hydration and strength of cement

Mechanical properties and durability of concrete modified with steel slag and silica fume

Experimental study on strength and abrasion-resistance enhancement admixture

Study on Modification Technology of High Calcium Fly Ash Compoound Steel Slag

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Effects of steel slag powder on workability and durability of concrete

Research Progress on the Effect of Steel Slag on the Cement Concrete Performance

Modification of steel slag powder by mineral admixture and chemical activators to utilize in cement-based materials

lnfluence of steel slag - superfine fly ash composite mineral admixture on the properties of concrete

Ultrafine Steel Slag and Latest Advance in Blending Materials of High Performance Concrete

Comparing Properties of Concrete Containing Electric Arc Furnace Slag and Granulated Blast Furnace Slag

Long-Term Properties of Concrete Containing Ground Granulated Blast Furnace Slag and Steel Slag

Influence of Steel Slag Powder on Compressive Strength and Durability of Concrete

Preparing High Strength Cementitious Materials with High Proportion of Steel Slag Through Reverse Filling Approach

Effect of fillers on the mechanical properties and durability of steel slag concrete

Utilization of Steel Slag Powder As A Combined Admixture with Ground Granulated Blast-Furnace Slag in Cement Based Materials

Preparation of sustainable and green cement-based composite binders with high-volume steel slag powder and ultrafine blast furnace slag powder

Valorization of converter steel slag into eco-friendly ultra-high performance concrete by ambient CO2 pre-treatment

The Mechanical Properties of Concrete Incorporating Steel Slag As Supplementary Cementitious Material