Abstract:Thermal annealing-induced enhancements of electrical conductivities at the temperature higher than the melting point of poly(ethylene-co-hexene) matrix for multiwalled carbon nanotubes filled poly(ethylene-co-hexene) (MWCNTs/PEH) composites were investigated by electrical conductivity measurements. Two types of MWCNTs with low and high aspect ratios (4 and 31) were added as fillers into PEH matrix, respectively for comparison study purpose. The morphological changes due to annealing for MWCNTs/PEH composites were observed by SEM. The formation of MWCNT networks in the composites were clearly demonstrated by rheological measurements. It is surprisingly found that the electrical conductivity for MWCNTs/PEH composites with high MWCNT concentrations increases obviously with annealing time of 40 min and the maximum increment approaches about 3 orders of magnitude with annealing time of 120 min. The increase of electrical conductivity of MWCNTs/PEH composites depends on MWCNT content, MWCNT aspect ratio and annealing time. SEM results clearly reveal that micrometer-sized MWCNT aggregates are broken down and more loosely packed MWCNT networks form due to annealing. Different types of networks in the composites are responsible for the evolutions of rheological (MWCNT network and PEH chain-MWCNT combined network) and electrical conductivity properties (tube-tube contacting MWCNT network). The reconstruction of MWCNT network during annealing is attributed to rotational diffusion of MWCNTs in PEH matrix at high temperature and the length of MWCNTs shows significant effect on this. The obvious enhancements of electrical conductivities can be ascribed to the thermal annealing-induced formation of loosely packed more homogeneous networks through non-Brownian motions.

Effect of Annealing on Graphene/PVDF Nanocomposites

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

The effect of thermal annealing of GO/PVA on their physical, structural, and morphological properties

Investigating the Annealing Effects on the Performance of Polyvinyl alcohol-Graphite-based Triboelectric Nanogenerator

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

PVDF Hybrid Nanocomposites with Graphene and Carbon Nanotubes and Their Thermoresistive and Joule Heating Properties

Laser annealing of graphene/P(VDF-TrFE) composite films and its effects on protein adsorption

Effect of the Surface Functionalization of Graphene and MWCNT on the Thermodynamic, Mechanical and Electrical Properties of the Graphene/MWCNT-PVDF Nanocomposites

Enhancing Thermal Conductive Performance of Vertically Aligned Carbon Nanotube Array Composite by Pre-Annealing Treatment.

Electrical conductivity and rheological properties of carbon black based conductive polymer composites prior to and after annealing

Relationship Between Microstructure Evolution and Properties Enhancement of Carbon Nanotubes‐filled Polybutylene Terephthalate/polypropylene Blends Induced by Thermal Annealing

Influence of annealing on dielectric and polarization behavior of PVDF thick films

Investigating the Effect of Thermal Annealing Process on the Photovoltaic Performance of the Graphene-Silicon Solar Cell

Thermal ageing of electrical conductivity in carbon nanotube/polyaniline composite films

Plasma treatment and annealing conditions on mechanical and electrical properties of thermoplastic composites

Influence of Annealing on Rheological and Conductive Behaviors of High-Density Polyethylene/carbon Black Composites

Positive Temperature Coefficient and Electrical Conductivity Investigation of Hybrid Nanocomposites Based on High‐Density Polyethylene/Graphene Nanoplatelets/Carbon Black

Thermal Annealing Induced Enhancements of Electrical Conductivities and Mechanism for Multiwalled Carbon Nanotubes Filled Poly(Ethylene-Co-Hexene) Composites