Abstract:Laser heat treatment is one of the important industrial applications of laser and being studied at the present time as a substitute for conventional thermal annealing. In this research (ZnO) thin films have been deposition on a glass by (Sol - Gel / Spin Coating) technique and annealed by two ways, the first one using a convection oven, where they were annealing with three temperatures (400, 500, 600) °C for one hour, and the second way using a continuous (CO2) laser with (10.6 μm) wavelength and (10 W) power and three intervals (10, 15, 20) min, were studied structural and optical properties of membranes prepared by both ways to determine the effect of laser annealing on them, and the results of (XRD) tests showed that these membranes with the structural of multi-crystalline hexagon compact type and increase the degree of temperature oven annealing, as well as increasing the duration of the laser annealing lead to increased volumes of granular membranes rates. The results of the (AFM) tests to the topography of the surfaces of the membranes to be of crystalline uniformity and homogeneity superficially good, especially for laser annealed membranes. The results of optical examinations of these membranes also showed that they having high permeability, especially in the regions of the visible spectrum and the near-infrared and increased with increase the degree of oven annealing temperature and the duration of laser annealing, and less energy gap of these membranes values with increase the temperature degree of annealing or increase of laser annealing time, In addition the optical properties studied in this research included absorbance, reflectivity, refractive index, coefficients of absorption and extinction, and real and imaginary dielectric constants.

Laser annealing of graphene/P(VDF-TrFE) composite films and its effects on protein adsorption

Effects of Defects and Thermal Treatment on the Properties of Graphene

The effect of thermal annealing of GO/PVA on their physical, structural, and morphological properties

Relationship between the Microstructure and Performance of Graphene/Polyethylene Composites Investigated by Positron Annihilation Lifetime Spectroscopy

Effect of Annealing on Graphene/PVDF Nanocomposites

Investigation of Thermal Annealing Effect on Bilayer Graphene by Isotope‐Labeling‐Assisted Raman Spectroscopy

Graphene Annealing: How Clean Can It Be?

Investigation of the Adsorption Behavior of Pbpc on Graphene by Raman Spectroscopy

Temperature dependence of piezo- and ferroelectricity in ultrathin P(VDF-TrFE) films

Annealing Free, Clean Graphene Transfer using Alternative Polymer Scaffolds

Effects of thin titanium and graphene depositions and annealing temperature on electrical, optical, and mechanical properties of IGZO/Ti/graphene/PI specimen

The Effect of Annealing and Optical Radiation Treatment on Graphene Resonators

Effect of interfacial chemistry on the linear rheology and thermal stability of poly(arylene ether nitrile) nanocomposite films filled with various functionalized graphite nanoplates

Optimizing the optical and electrical properties of graphene ink thin films by laser-annealing

Influence of Annealing on Polymer Optical Fiber Bragg Grating Inscription, Stability and Sensing: A Review

Effect of Heat Treatment on Interfacial Bonding and Strengthening Efficiency of Graphene in GNP/Al Composites

Influence of Rapid Thermal Annealing on Structural and Interfacial Properties of Lead-Zirconate-Titanate Thin-Films Prepared by Excimer-Laser Deposition

Effects of laser processing parameters on properties of laser-induced graphene by irradiating CO2 laser on polyimide

Thermal annealing of exfoliated graphene

Effect of crystallinity on optical properties of PEEK prepreg tapes for laser-assisted automated fiber placement

Effect of annealing by CO2 laser on Structural and optical properties of zinc oxide thin films prepared by Sol – gel method