Abstract:Micro‐mesopore carbonaceous material (56.8% mesopores) was applied for effectively removing naproxen drug from water. Its maximum adsorption capacity was 252.7 at 25°C, 268.5 mg/g at 40°C, and 317.4 mg/g at 55°C. A decrease in its BET‐surface area from 585 to 71.6 m2/g after adsorption confirmed pore‐filing mechanism (physical adsorption). Commercial micro‐mesoporous carbonaceous material (MCM; 56.8% mesopores) was applied for investigating the removal phenomenon of naproxen drug in aqueous solutions through batch adsorption experiments. Results demonstrated that the adsorption capacity of MCM to naproxen was slightly affected by different pHeq (2.0–11) and ionic strength (0–1 M NaCl). Adsorption kinetics, isotherms, thermodynamics, and mechanisms were evaluated at pH 7.0. Adsorption kinetics indicated the rate constants for adsorption (0.2 × 10−3 L/(mg × min) and desorption (0.076/min) and the adsorption equilibrium constant (2.6 × 10−3 L/mg). Adsorption isotherm showed that MCM exhibited a high‐affinity adsorption capacity to naproxen (even at low concentrations) and its Langmuir maximum adsorption capacity (Qmax) was 252.7 mg/g at 25°C. Adsorption thermodynamics proved that the adsorption process was endothermic and physisorption (ΔH° = 9.66 kJ/mol). The analysis result of pore size distribution demonstrated that the internal pore structure of MCM was appropriate for adsorbing naproxen molecules. Pore‐filing mechanism (pore diffusion phenomenon) was confirmed by a considerable decrease in BET‐surface area (585 m2/g) and total pore volume (0.417 cm3/g) of MCM after adsorbing naproxen (~1000 mg/L and pH 7.0) at 5 min (341 and 0.256), 60 min (191 and 0.205), 120 min (183 and 0.193), 360 min (144 and 0.175), and 24 h (71.6 m2/g and 0.123 cm3/g, respectively). The pore diffusion occurred rapidly (even at the initial adsorption period of 5 min). The FTIR technique was applied to identify the existence of C–H···π and n–π interaction. π–π interaction (evaluated through ID/IG ratio and C=C band) played a minor contribution in adsorption mechanisms. The ID/IG ratio (determined by the Raman technique) of MCM before adsorption (1.195) was similar to that after adsorption (1.190), and the wavenumber (C=C band; its FTIR spectrum) slightly shifted from 1638 to 1634 cm−1 after adsorption. A decrease in the Qmax value of MCM from 249 to 217 (H2O2‐oxidized MCM) or to 224 mg/g (HNO3‐oxidized MCM) confirmed the presence of π–π interaction. Electrostatic attraction was a minor contribution. MCM can serve as a promising material for removing naproxen from water environment through a pore‐filling mechanism. Practitioner Points Pore‐filling mechanism was proposed by comparing textural properties of MCM before and after adsorbing naproxen. C–H···π and n–π interactions were identified via FTIR technique. π–π interaction was observed by FTIR and Raman techniques. Oxidation of MCM with HNO3 or H2O2 was a helpful method to explore π–π interaction. Electrostatic attraction was explained through studies: effects of pH and NaCl along with desorption.

Adsorption of naproxen pharmaceutical micropollutant from aqueous solutions on superior activated carbon synthesized from sheep manure: Kinetics, thermodynamics, and mechanism

Important role of pore‐filling mechanism in separating naproxen from water by micro‐mesoporous carbonaceous material

Kinetic and isothermal studies of naproxen adsorption from aqueous solutions using walnut shell biochar

Adsorptive removal of naproxen onto nano magnesium oxide-modified castor wood biochar: Treatment of pharmaceutical wastewater via sequential Fenton's-adsorption process

Adsorption of non-steroidal anti-inflammatory drugs from aqueous solution using activated carbons: Review

Peroxymonosulfate activation by superparamagnetic mixed-valent Cu/N-(L-cysteine)-O-(carboxymethyl)chitosan/cobalt ferrate-rice hull hybrid nanocomposite for efficient degradation of naproxen: Synergetic adsorption-catalysis, kinetics, pathway, and relevant mechanism

Heterogeneous Oxidation of Naproxen in the Presence of Α-Mno2 Nanostructures with Different Morphologies

Removal of Naproxen from Aqueous Solutions using Eco-Friendly Bio-Adsorbent Prepared from Orange Peels

Utilizing Hydrothermally Carbonized Food Waste-Derived Activated Hydrochar for the Elimination of Carbamazepine and Naproxen

Adsorptive Removal of Ibuprofen, Ketoprofen and Naproxen from Aqueous Solution Using Coconut Shell Biomass

Performance and optimization of diclofenac and ibuprofen adsorption onto activated carbon synthesized from sunflower seed shell (Helianthus annuus) in natural groundwater samples

Nitrogen-doped mesoporous activated carbon from Lentinus edodes residue: an optimized adsorbent for pharmaceuticals in aqueous solutions

Photocatalytic Degradation of Naproxen: Intermediates and Total Reaction Mechanism

Comprehensive Studies of Adsorption Equilibrium and Kinetics for Selected Aromatic Organic Compounds on Activated Carbon

Rapid and efficient removal of naproxen from water by CuFe2O4 with peroxymonosulfate

Inhibition caused by adsorption of organic micropollutants (MPs) on PES@CoFe 2 O 4 polymeric ultrafiltration membranes and the enhanced MPs degradation by a continuous pH regulation

Optimization of Preparation of Microporous Activated Carbon with High Surface Area from Spartina Alterniflora and Its P-Nitroaniline Adsorption Characteristics

Kinetics and equilibrium adsorption study of p-nitrophenol onto activated carbon derived from walnut peel

Nitrogen-doped activated carbon derived from biomass waste for effective removal of doxycycline from aqueous solution: characterization and adsorption mechanism

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Selective Adsorption of Naphthalene in Aqueous Solution on Mesoporous Carbon Functionalized by Task-Specific Ionic Liquid