Abstract:Micro‐mesopore carbonaceous material (56.8% mesopores) was applied for effectively removing naproxen drug from water. Its maximum adsorption capacity was 252.7 at 25°C, 268.5 mg/g at 40°C, and 317.4 mg/g at 55°C. A decrease in its BET‐surface area from 585 to 71.6 m2/g after adsorption confirmed pore‐filing mechanism (physical adsorption). Commercial micro‐mesoporous carbonaceous material (MCM; 56.8% mesopores) was applied for investigating the removal phenomenon of naproxen drug in aqueous solutions through batch adsorption experiments. Results demonstrated that the adsorption capacity of MCM to naproxen was slightly affected by different pHeq (2.0–11) and ionic strength (0–1 M NaCl). Adsorption kinetics, isotherms, thermodynamics, and mechanisms were evaluated at pH 7.0. Adsorption kinetics indicated the rate constants for adsorption (0.2 × 10−3 L/(mg × min) and desorption (0.076/min) and the adsorption equilibrium constant (2.6 × 10−3 L/mg). Adsorption isotherm showed that MCM exhibited a high‐affinity adsorption capacity to naproxen (even at low concentrations) and its Langmuir maximum adsorption capacity (Qmax) was 252.7 mg/g at 25°C. Adsorption thermodynamics proved that the adsorption process was endothermic and physisorption (ΔH° = 9.66 kJ/mol). The analysis result of pore size distribution demonstrated that the internal pore structure of MCM was appropriate for adsorbing naproxen molecules. Pore‐filing mechanism (pore diffusion phenomenon) was confirmed by a considerable decrease in BET‐surface area (585 m2/g) and total pore volume (0.417 cm3/g) of MCM after adsorbing naproxen (~1000 mg/L and pH 7.0) at 5 min (341 and 0.256), 60 min (191 and 0.205), 120 min (183 and 0.193), 360 min (144 and 0.175), and 24 h (71.6 m2/g and 0.123 cm3/g, respectively). The pore diffusion occurred rapidly (even at the initial adsorption period of 5 min). The FTIR technique was applied to identify the existence of C–H···π and n–π interaction. π–π interaction (evaluated through ID/IG ratio and C=C band) played a minor contribution in adsorption mechanisms. The ID/IG ratio (determined by the Raman technique) of MCM before adsorption (1.195) was similar to that after adsorption (1.190), and the wavenumber (C=C band; its FTIR spectrum) slightly shifted from 1638 to 1634 cm−1 after adsorption. A decrease in the Qmax value of MCM from 249 to 217 (H2O2‐oxidized MCM) or to 224 mg/g (HNO3‐oxidized MCM) confirmed the presence of π–π interaction. Electrostatic attraction was a minor contribution. MCM can serve as a promising material for removing naproxen from water environment through a pore‐filling mechanism. Practitioner Points Pore‐filling mechanism was proposed by comparing textural properties of MCM before and after adsorbing naproxen. C–H···π and n–π interactions were identified via FTIR technique. π–π interaction was observed by FTIR and Raman techniques. Oxidation of MCM with HNO3 or H2O2 was a helpful method to explore π–π interaction. Electrostatic attraction was explained through studies: effects of pH and NaCl along with desorption.

Heterogeneous Oxidation of Naproxen in the Presence of Α-Mno2 Nanostructures with Different Morphologies

Heterogeneous Oxidation of Diclofenac in the Presence of Α-Mno2 Nanorods: Influence of Operating Factors and Mechanism

Peroxymonosulfate activation by superparamagnetic mixed-valent Cu/N-(L-cysteine)-O-(carboxymethyl)chitosan/cobalt ferrate-rice hull hybrid nanocomposite for efficient degradation of naproxen: Synergetic adsorption-catalysis, kinetics, pathway, and relevant mechanism

Enhancement on the degradation of naproxen in Cu 0 activated peroxymonosulfate system by complexing reagents

Rapid and efficient removal of naproxen from water by CuFe2O4 with peroxymonosulfate

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Theoretical analysis of naproxen reaction with sulfate and hydroxyl radicals in the aqueous phase: Investigating reactive sites and reaction kinetics

Photocatalytic Degradation of Naproxen: Intermediates and Total Reaction Mechanism

New insight into the regulation mechanism of visible light in naproxen degradation via activation of peroxymonosulfate by MOF derived BiFeO3

Important role of pore‐filling mechanism in separating naproxen from water by micro‐mesoporous carbonaceous material

Novel manganese carbon quantum dots as a nano-probe: Facile synthesis, characterization and their application in naproxen delivery (Mn/CQD/SiO2@naproxen)

Catalytic oxidation of NO over SmMn2O5 nanostructures derived from different Mn precursors

Cu0 incorporated cobalt/nitrogen doped carbonaceous frameworks derived from ZIF-67 (Cu@CoNC) as PMS activator for efficient degradation of naproxen: Direct electron transfer and 1O2 dominated nonradical mechanisms

New insights into MnOOH/peroxymonosulfate system for catalytic oxidation of 2,4-dichlorophenol: Morphology dependence and mechanisms

Roles of structure defect, oxygen groups and heteroatom doping on carbon in nonradical oxidation of water contaminants

Facile synthesis of solar light-driven Z-scheme Ag2CO3/TNS-001 photocatalyst for the effective degradation of naproxen: Mechanisms and degradation pathways

Confined heterogeneous catalysis by boron nitride-Co<sub>3</sub>O<sub>4</sub> nanosheet cluster for peroxymonosulfate oxidation toward ranitidine removal

Vitamin B12 Derived CoCNx Composite Confined in SBA-15 As Highly Effective Catalyst to Activate Peroxymonosulfate for Naproxen Degradation

MoS2/N-TiO2/Ti mesh plate for visible-light photocatalytic ozonation of naproxen and industrial wastewater: comparative studies and artificial neural network modeling

Efficient degradation of naproxen in wastewater using Ag-deposited ZnO nanoparticles anchored on a house-of-cards-like MFI-type zeolite: Preparation and physicochemical evaluations of the photocatalyst

Catalytic ozonation for metoprolol and ibuprofen removal over different MnO2 nanocrystals: Efficiency, transformation and mechanism