Abstract:To improve the stability of waterborne epoxy–acrylic emulsions and their comprehensive properties, such as the chemical resistance of coatings, a new research idea is proposed in this paper. First, a series of high-molecular-weight epoxy resins were synthesized with epoxy resin E-51 and bisphenol A (BPA) using benzyl triphenyl phosphine bromide as the catalyst. Then, free-radical graft copolymerization was carried out between the epoxy resin and methacrylic acid (MAA), styrene (ST), and butyl acrylate (BA) using benzoyl peroxide (BPO) as the initiator. This method ensured that the epoxy groups were retained. Finally, the carboxylic acid groups were neutralized with N,N-dimethylethanolamine (DMEA), and a stable aqueous epoxy–acrylic emulsion was obtained by high-speed dispersion in deionized water. The effects of key factors such as temperature, time, the molecular weight and dosage of epoxy resin, the dosage of MAA, the dosage of BPO, and the neutralization degree of the synthesis of emulsions and coating film properties were mainly discussed. The molecular weight and molecular weight distribution of the epoxy resin were determined by gel permeation chromatography (GPC). The epoxy resin and its graft copolymer were analyzed and characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The particle size and distribution of the emulsions were tested by laser particle size analysis. The morphology of the emulsion particles was observed by transmission electron microscopy. The results showed that the acrylic monomers (MAA, ST, and BA) were grafted onto the epoxy resin. The graft copolymers showed higher glass transition temperatures compared with those of the pure epoxy resin. TGA showed that the graft copolymer started to decompose at a high temperature before the pure epoxy resin did, and the thermal stability was slightly reduced. The prepared emulsions with a particle size of 160 nm had a storage stability of more than one year and showed excellent dilution stability, mechanical stability, and freeze–thaw stability. The emulsions were coated and cured at 150 °C for 1 h with a pencil hardness of 5 H, an adhesion of grade 1, and a flexibility of 1 mm. The water resistance was >60 days, the salt water resistance was >30 days, the acid resistance was >10 days, and the alkali resistance was >5 days.

Preparation and Properties of Polystyrene/Polyacrylate Emulsion Based on Acetoacetate/Diamine Self-crosslinking at Ambient Temperature

Stability of Emulsion Copolymerization of Acrylic Monomers Containing Amino and Hydroxyl Groups

Preparation and Characterization of MMA-BA-DMAEMA Terpolymer Latex

Seed Semicontinuous Emulsion Multi-Copolymerization of (meth)acrylates with High-Solid Content - Effect of the Operation Conditions

Preparation and properties of ambient self-crosslinking acrylic emulsion

Study on Improve Interface Tensile Adhesive Property of Extruded Polystyrene Board with Acrylate Emulsion

Synthesis and Characterization of Self-cross Linking Hybrid Silicone-acrylate Emulsion at Ambient Temperature

Preparation and characterization of self-crosslinking acrylate emulsion modified by divinyl silane

Preparation and Characterization of Self-crosslinked Acrylate Emulsified with Environmentally Friendly Surfactants

Synthesis and Cross-linking Properties of MMA/BA/DAAM Copolymer Emulsion

Synthesis of ambient temperature self-crosslinking VTES-based core–shell polyacrylate emulsion via modified micro-emulsion polymerization process

Ab Initio RAFT Emulsion Copolymerization of Styrene and Acrylonitrile

Synthesis of Polyacrylate Emulsion and the Properties of Ambient Curable Coatings

Styrene–Acrylic Emulsion with “Transition Layer” for Damping Coating: Synthesis and Characterization

Preparation of Emulsifier-Free Styrene–Acrylic Emulsion via Reverse Iodine Transfer Polymerization

Effects of Monomer Polarity on Mma/Ba/Nama Emulsifier-Free Emulsion Copolymerization

Preparation of low‐temperature self‐crosslinking acrylic resin and its performance research

Preparation and Performance of a Self-Produced High-Molecular-Weight Waterborne Epoxy–Acrylic Emulsion

Study on Damping Properties of Acrylate Latex Copolymer

Synthesis and Properties of the FA/LMA/MMA Copolymer Emulsion

Synthesis and properties of crosslinked waterborne polyurethane/acrylate copolymer latexes using AIBN initiator based on a solvent-/emulsifier-free method