Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

4D Printing of Continuous Fiber-Reinforced Electroactive Smart Composites by Coaxial Additive Manufacturing

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

4D Printing of 3D Carbon‐Medium Reinforced Thermosetting Shape Memory Polymer Composites with Superior Load‐Bearing and Fast‐Response Shape Reconfiguration

Co-extrusion 4D printing of shape memory polymers with continuous metallic fibers for selective deformation

Electrothermal shape memory behavior and recovery force of four-dimensional printed continuous carbon fiber/polylactic acid composite

Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer composites

4D Printing of Shape Memory Polymer Nanocomposites for Enhanced Performances and Tunable Response Behavior

Assessment of mechanical properties and shape memory behavior of 4D printed continuous fiber-reinforced PETG composites

Cross-linking degree modulation of 4D printed continuous fiber reinforced thermosetting shape memory polymer composites with superior load bearing and shape memory effects

Four-Dimensionally Printed Continuous Carbon Fiber-Reinforced Shape Memory Polymer Composites with Diverse Deformation Based on an Inhomogeneous Temperature Field

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

4D Printing of Smart Polymer Nanocomposites: Integrating Graphene and Acrylate Based Shape Memory Polymers

Advances in 4D Printed Shape Memory Composites and Structures: Actuation and Application

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives

Reconfigurable 4D printing via mechanically robust covalent adaptable network shape memory polymer

Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite

4D Printing Of Shape Memory Epoxy For Adaptive Dynamic Components

Digital light processing 4D printing multilayer polymers with tunable mechanical properties and shape memory behavior

Experimental investigations of temperature-sensitive shape memory polymer composites for 4D printing