Abstract:Vertical GaN junction barrier Schottky (JBS) diodes with superior electrical characteristics and nondestructive breakdown were realized using selective-area p-type doping via Mg ion implantation and subsequent ultra-high-pressure annealing. Mg-ion implantation was performed into a 10 μ m thick Si-doped GaN drift layer grown on a free-standing n-type GaN substrate. We fabricated the JBS diodes with different n-type GaN channel widths L n = 1 and 1.5 μ m. The JBS diodes, depending on L n , exhibited on-resistance ( R ON ) between 0.57 and 0.67 mΩ cm 2 , which is a record low value for vertical GaN Schottky barrier diodes (SBDs) and high breakdown (BV) between 660 and 675 V (84.4% of the ideal parallel plane BV). The obtained low R ON of JBS diodes can be well explained in terms of the R ON model, which includes n-type GaN channel resistance, spreading current effect, and substrate resistance. The reverse leakage current in JBS diodes was relatively low 10 3 –10 4 times lower than in GaN SBDs. In addition, the JBS diode with lower L n exhibited the leakage current significantly smaller (up to reverse bias 300 V) than in the JBS diode with large L n , which was explained in terms of the reduced electric field near the Schottky interface. Furthermore, the JBS diodes showed a very high current density of 5.5 kA/cm 2 , a low turn-on voltage of 0.74 V, and no destruction against the rapid increase in the reverse current approximately by two orders of magnitude. This work demonstrated that GaN JBS diodes can be strong candidates for low loss power switching applications.

Lateral p-type GaN Schottky barrier diode with annealed Mg ohmic contact layer demonstrating ideal current–voltage characteristic

Vertical GaN Schottky Barrier Diode with Hybrid PNiO Junction Termination Extension

High Performance Lateral Schottky Diodes Based on Quasi-Degenerated Ga 2 O 3

Mg-implanted vertical GaN junction barrier Schottky rectifiers with low on resistance, low turn-on voltage, and nearly ideal nondestructive breakdown voltage

0.58 Mω;cm2/523 V GaN Vertical Schottky Barrier Diode with 15.6 Ka/cm2; Surge Current Enabled by Laser Lift-Off/ Annealing and N-Ion Implantation

High-Voltage and High-I ON /I OFF Quasi-Vertical GaN-on-Si Schottky Barrier Diode With Argon-Implanted Termination

Demonstration of a 2 Kv Al 0.85 Ga 0.15 N Schottky Barrier Diode with Improved On-Current and Ideality Factor

High-Performance GaN Vertical Schottky Barrier Diode with Self-Alignment Trench Structure

Fully-Vertical GaN-on-SiC Schottky Barrier Diode: Role of Conductive Buffer Structure

Theoretical and Experimental Study on AlGaN/GaN Schottky Barrier Diode on Si Substrate with Double-Heterojunction

1.4-Kv Quasi-Vertical GaN Schottky Barrier Diode with Reverse P-N Junction Termination

0.58 mΩ·cm<sup>2</sup>/523 V GaN Vertical Schottky Barrier Diode with 15.6 kA/cm<sup>2</sup> Surge Current Enabled by Laser Lift-Off/Annealing and N-Ion Implantation

50 A vertical GaN Schottky barrier diode on a free-standing GaN substrate with blocking voltage of 790 V

GaN Lateral Schottky Diodes with High Baliga's Figure-of-Merit Utilizing Self-Terminated, Low Damage Anode Recessing Technology.

Demonstration of Al0.85Ga0.15N Schottky Barrier Diode with > 3 Kv Breakdown Voltage and the Reverse Leakage Currents Formation Mechanism Analysis

High-Voltage and High- $i_{\text {on}}/i_{\text {OFF}}$ Vertical GaN-on-GaN Schottky Barrier Diode with Nitridation-Based Termination

Quasi-Vertical GaN-on-Silicon Schottky Barrier Diode Terminated With Hydrogen Modulated In-Situ pn Junction

Quasi-Vertical GaN Schottky Barrier Diode on Silicon Substrate With 10<SUP>10</SUP> High On/Off Current Ratio and Low Specific On-Resistance

Quasi-Vertical GaN Schottky Barrier Diode on Silicon Substrate with 1010 High On/Off Current Ratio and Low Specific On-Resistance

High-voltage vertical GaN Schottky diode enabled by low-carbon metal-organic chemical vapor deposition growth

Vertical GaN junction barrier Schottky diodes with near-ideal performance using Mg implantation activated by ultra-high-pressure annealing