Abstract:Extensive research and application of recycling methods for spent lithium-ion batteries (LIBs) have been undertaken in recent years with great success. However, the separation of valuable metals from the lixivium of spent LIBs, which contains Al, Cu, Ni, Co, Mn, and Li, is complicated, burdensome, and unsustainable. Therefore, there is a need to establish a more sustainable and energy-efficient method for recycling spent LIBs. The study introduced an innovative methodology for replacing the impurity ion removal process in the lixivium with magnetic separation pretreatment. Then, the co-precipitation method was used to directly resynthesize LiNi0.5- Co0.2Mn0.3O2 (LNCM523) with recovered metals as raw materials. The results demonstrate that, with a magnetic field intensity of 3000 Oe and feed particle size of -0.074 mm, the magnetic separation concentrates the following grades: Ni -26.34%, Co -14.26%, Mn-28.30%, Al -0.23%, and Cu-0.41%. The corresponding recovery rates were also determined as follows: Ni -92.57%, Co -94.16%, Mn-85.68%, Al -1.62%, and Cu-2.14%. The total impurities (Al, Cu, and Fe) in the lixivium obtained by magnetic separation concentrate under conventional acid leaching conditions were below 0.05 wt%, while the contents of Ni, Co, and Mn were measured at 13.08 g/L, 7.10 g/L, and 14.06 g/L, respectively. Spherical LNCM523 was successfully regenerated from the lixivium through co-precipitation and sintering. The LNCM523 demonstrated exceptional electrochemical performance, exhibiting a notable initial discharge capacity of 173.9 mAh/g at 0.2 C and remarkable cycling stability with 91.9% retention over 100 cycles at 0.5 C. In comparison to the conventional approach, this method circumvented the intricate procedure of separating metal ions, thereby realizing the resource regeneration of cathode materials and enabling a closed-circuit recycling process. These advancements contributed to fostering sustainable lowcarbon development of the spent LIBs.

Characterization and recycling of lithium nickel manganese cobalt oxide type spent mobile phone batteries based on mineral processing technology

Synergetic Carbothermic Reduction and Selective Hydrochlorination of Spent Li-ion Batteries Black Mass Towards Enhanced Metal Recovery

A breakthrough method for the recycling of spent lithium-ion batteries without pre-sorting

Recycling Valuable Metals from Spent Lithium-Ion Battery Cathode Materials Based on Microwave-Assisted Hydrogen Reduction Followed by Grind-Leaching and Magnetic Separation

Thermal Treatment and Ammoniacal Leaching for the Recovery of Valuable Metals from Spent Lithium-Ion Batteries.

Stepwise recycling of valuable metals from spent lithium-ion batteries based on in situ thermal reduction and ultrasonic-assisted water leaching

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Chemical and Process Mineralogical Characterizations of Spent Lithium-Ion Batteries: an Approach by Multi-Analytical Techniques.

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

An Efficient Recovery Process of Valuable Metals from Spent Lithium-Ion Batteries in Acidic Medium Assisted with Waste Areca Powder

Sustainable Regeneration of High-Performance Cathode Materials from Spent Lithium-Ion Batteries Through Magnetic Separation and Coprecipitation

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Pollutant Reduction and Closed-Loop Process for Recovering High Value-Added Products from Spent Lithium-Ion Batteries

Improved hydrometallurgical extraction of valuable metals from spent lithium-ion batteries via a closed-loop process

A Green and Efficient Combination Process for Recycling Spent Lithium-Ion Batteries

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

A Promising Approach for the Recovery of High Value-Added Metals from Spent Lithium-Ion Batteries

RECOVERY OF LiMn1/3Ni1/3Co1/3O2 FROM SPENT LITHIUM-ION BATTERY USING A SPECIALLY DESIGNED DEVICE

Spent lithium manganate batteries for sustainable recycling: A review

An Atom-Economic Process for the Recovery of High Value-Added Metals from Spent Lithium-Ion Batteries