Preparation and Characterization of Ni-CeO2/Al2 O3 and Its Catalytic Performance for Methanation of Biomass Syngas
LIU Jie,ZHANG Pan-pan,ZHAN Tian,XIAO Bo,LI Guang-xing,MEI Fu-ming
DOI: https://doi.org/10.3969/j.issn.1672-5425.2016.08.005
2016-01-01
Abstract:A series of Ni-based catalysts with addition of different additives (CeO2 ,ZrO2 ,Co3 O4 ,Y2 O3 , V2 O5 )were prepared by a co-impregnation method.The structure of the catalysts was characterized by XRD, SEM,BET,H 2-TPR,etc.Effects of Ni content,additive content,impregnation order,calcination temperature, reduction temperature and space velocity(SV)on the catalytic activity were investigated.The catalytic perform-ance for methanation of biomass syngas was evaluated.Results showed that,adding CeO2 ,ZrO2 ,Y2 O3 ,V2 O5 could improve the catalytic activity for methanation of CO,and the catalyst 6Ni-3CeO2/Al2 O3 had the highest catalytic activity,the best stability and the best coke resistance.Using 6Ni-3CeO2/Al2 O3 as a catalyst,CO could be completely converted at conditions as follows:V (H 2 )∶V (CO)∶V (N2 )=0.45 ∶0.15 ∶0.40,SV=20 000 h-1 ,atmosphere pressure,350 ℃,CH 4 selectivity reached 90%,which increased by 1 6% than that of catalyst 6Ni/Al2 O3 ,the temperature of CO completely conversion was 50 ℃ lower than that of catalyst 6Ni/Al2 O3 .The Ni content of catalyst 6Ni-3CeO2/Al2 O3 was obviously lower than that of reported in literature.The catalyst was applied to methanation of biomass syngas by catalytic hydrogenation with CO conversion rate of 80.5%, and the problem “CO content in biomass syngas is higher than civil gas standard”was effectively solved.