Abstract:A series of Ni catalysts supported on alumina with different Ce contents(1.0%–6.0%, mass fraction) was prepared by the impregnation method and used for dry reforming of methane(DRM) at a relatively low temperature of 650 °C. The promotion effect of Ce with different loading amounts on the physicochemical properties of the catalysts was systematically characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD), N2 adsorption-desorption, thermo elemental IRIS Intrepid inductively coupled plasma atomic emission spectrometer (ICP-AES), UV-visible diffuse reflectance spectroscopy(UV-Vis DRS), Fourier transformation infrared(FTIR) spectra, H2-temperature programmed reduction(H2-TPR) analysis, H2-temperature programmed desorption(H2-TPD), and The X-ray photoelectron spectroscopy(XPS) techniques. The results indicate that all the catalysts mainly exist in the NiAl2O4 phase after being calcined at 750 °C with small Ni particle sizes due to the strong metal-support interaction derived from the reduction of the NiAl2O4 phase. The Ce-promoted catalysts show better catalytic performance as well as the resistance against sintering of Ni particles and deposition of carbon compared to the Ni/Al2O3 catalyst. The Ni-6Ce/Al2O3 exhibits the best catalytic stability and coke resistance among the four catalysts studied, which is due to its small Ni nanoparticles sizes, excellent reducibility as well as high amount of active oxygen species. In a 400 h stability test for DRM reaction at 650 °C, Ni-6Ce/Al2O3 exhibits less coke deposition and small growth of Ni nanoparticles. This work provides a simple way to preparing the Ni-Ce/Al2O3 catalyst with enhanced catalytic performance in DRM. The Ni-6Ce/Al2O3 catalyst has great potential for industrial application due to its anti-sintering ability and resistance to carbon deposition.

Facile Route for Synthesizing Ordered Mesoporous Ni–Ce–Al Oxide Materials and Their Catalytic Performance for Methane Dry Reforming to Hydrogen and Syngas

One‐pot Synthesis of Ordered Mesoporous NiCeAl Oxide Catalysts and a Study of Their Performance in Methane Dry Reforming

Ordered Mesoporous Alumina Supported Nickel Based Catalysts for Carbon Dioxide Reforming of Methane

Ni-foam-structured NiO-MOx-Al2O3 (M = Ce or Mg) Nanocomposite Catalyst for High Throughput Catalytic Partial Oxidation of Methane to Syngas

Rational design of nickel-based catalyst coupling with combined methane reforming to steadily produce syngas

Facile Synthesis of Multi-Layered Nanostructured Ni/Ceo2 Catalyst Plus In-Situ Pre-Treatment for Efficient Dry Reforming of Methane

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

One-Pot Synthesis of Ordered Mesoporous NiSiAl Oxides for Catalyzing CO2 Reforming of CH4

The Study of CO2 Reforming of Methane over Ce/Sm-promoted NiCaAl Catalysts

Synthesis, characterization and catalytic performances of Ce-SBA-15 supported nickel catalysts for methane dry reforming to hydrogen and syngas

Carbon Dioxide Reforming of Methane over Ordered Mesoporous NiO–MgO–Al2O3 Composite Oxides

Ceria-modified Nickel Supported on Porous Silica As Highly Active and Stable Catalyst for Dry Reforming of Methane

CO2 Reforming of CH4 over Rare Earth Elements Functionalized Mesoporous Ni–Ln (ln = Ce, La, Sm, Pr)–Al–O Composite Oxides

One-Pot Synthesis of Ordered Mesoporous NiO–CaO–Al2O3Composite Oxides for Catalyzing CO2Reforming of CH4

Engineering the Quaternary Hydrotalcite-Derived Ce-Promoted Ni-Based Catalysts for Enhanced Low-Temperature CO2 Hydrogenation into Methane.

Methane Reforming with Co2 to Syngas over Ceo2-Promoted Ni/Al2o3-Zro2 Catalysts Prepared Via A Direct Sol-Gel Process

Engineering the Interface and Interaction Structure on Highly Coke-Resistant Ni/CeO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub> Catalyst for Dry Reforming of Methane

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

CeO 2 - and CaO-Promoted Precipitation Method for One-Step Preparation of Vermiculite-Based Multilayer Mesoporous Ni-Based Catalysts for Dry Reforming of Methane

High-performance Ni-CeAlO3-Al2O3/FeCrAl-fiber Catalyst for Catalytic Oxy-Methane Reforming to Syngas

Synthesis Gas Production in the Combined CO2 Reforming with Partial Oxidation of Methane over Ce-promoted Ni/SiO2 Catalysts