Abstract:Vertical sluice gates are commonly used to control and measure flow in irrigation and drainage networks. To reduce their size and associated maintenance and operation costs, they are sometimes installed above broad-crested weirs. To explore the effects of the installation location of the sluice gate and the sill height on the hydrodynamic characteristics of the flow passing through the sluice-gated weir, six laboratory models were tested. The 427 and 449 data points included both free- and submerged-flow conditions, respectively. Analytical relationships were developed for the contraction, head-loss, and Henry's (1950) discharge coefficients. Based on the maximization of the discharge and contraction coefficients and the minimization of the head-loss coefficient, results suggest that a gate should be installed at a distance of L /2 (where L is the sill length) from the upstream end of the weir crest, and the height of 1.25 H d (where H d is the water depth as referenced from the weir sill elevation) is the optimal height for the weir. By conducting experiments and constructing correlations for determining the contraction and head-loss coefficients under free flow conditions, the average values of these coefficients for the laboratory models were obtained as 0.664 and 0.133, respectively. Applying the average contraction and head-loss coefficients to the developed relationship for estimating the free and submerged discharge coefficients resulted in an error of 4% and 6%, respectively. WinGate alpha 0.2 software was used to estimate the experimental free and submerged discharge coefficient of the gated weir with an average error of 5.4% and 12.7%, respectively. It was done without any consideration of the cross-section shape of the weir or the location of the gate on the weir sill. In addition, an inspection of the submergence threshold of the gated weir showed an increase in the submergence threshold when the gate was moved further downstream from the upstream end of the sill.

Hydraulic jump efficiency on sluice gate with different operating systems and dissipaters

Hydraulic characteristics of labyrinth sluice gate

Hydraulic characteristics of a sluice gate over a broad-crested weir

Experimental and simulation analysis of flow patterns and energy dissipation through sluice gates in a U-shaped channel

Experimental and numerical modeling of the simultaneous effect of sluice gate and bump on hydraulic jump

Investigation of the effect of variable-sized energy dissipating blocks on sluice gate performance

Experimental Study and Flow Analysis on a New Design of Water-Retaining Sluice Gate

Flow Downstream Sluice Gate with Orifice

Hydraulic Issues of Energy Dissipation and Erosion Control for Horizontal Gate

Investigation of flow characteristics downstream vertical sluice gates of Bahr Yousef regulator physical model

Displacement of a Hydraulic Jump in a Rectangular Channel: Experimental Study

Unlocking precision in hydraulic engineering: machine learning insights into labyrinth sluice gate discharge coefficients

Flow through a sluice gate over a broad crested weir under free- and submerged-flow conditions

Analysis of the Hydraulic Jump Characteristics in a Stilling Basin to Avoid Dam Failure

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

Performance of Screen in a Sudden Expanding Stilling Basin under the Effect of the Submerged Hydraulic Jump

Influence of Sill on the Hydraulic Regime in Sluice Gates: An Experimental and Numerical Analysis

Analysis and research on sluice gate flow of a hydropower station under different working conditions

Sluice Gate Design and Calibration: Simplified Models to Distinguish Flow Conditions and Estimate Discharge Coefficient and Flow Rate

Application of CFD to predict the sluice gate jammed

Numerical simulation of flow characteristics of discharge under sluice gate