Abstract:Numerous fluorine-containing hazardous solid wastes from the electrolytic aluminum process pose a serious threat to the ecosystem and human health. Currently, in the study of leaching on these wastes, Al and F are usually recovered by adjusting the pH of the leaching solution to precipitate aluminium hydroxyfluoride hydrate, which can be used to produce aluminum fluoride by roasting. However, aluminium hydroxyfluoride hydrate is often mingled with cryolite and other impurities when precipitating, which ultimately affects the purity of obtained aluminum fluoride by calcination. Interestingly, herein, the aluminium hydroxyfluoride hydrate residue was digested by fluorosilicic acid to effectively remove impurities and obtain a pure aluminum fluoride solution, from which the β-AlF 3 product was produced by crystallization at a high-temperature. The results show that under the conditions of a temperature of 60 °C, time of 35 min, initial fluorine-aluminum molar ratio of 3:1 and initial concentration of fluorosilicic acid of 18 %, the gross yield of fluorine is 86.2 %, and the recovery of silicon in the form of SiO 2 is 95.2 %. During crystallization, the product changes from AlF 3 ·3H 2 O to β-AlF 3 with the increase of temperature. Under the conditions of a crystallization temperature of 150 °C, an initial concentration of aluminum fluoride of 191.10 g/L and a stirring speed of 200 rpm, β-AlF 3 of an average particle size of 43.22 μm was obtained by adding 5 % seed. The contents of Al and F in β-AlF 3 products are 32.57 % and 61.49 % respectively, which meet the requirements of GB/T 4292–2017 (AF-0) about National Standards of China. According to DFT calculation, the β-AlF 3 tends to adsorb two or three water molecules in its cavity structure, which explains why the crystallized β-AlF 3 contains water of 5.10 % at 180 °C.

Separation and conversion of fluoride salts in aluminum electrolysis flue gas by one-step ammonia purification

Streamer Plasma Induced Ammonia Flue Gas Desulfurization

Study on preparation of aluminum fluoride from cryolite

Preparation of aluminum fluoride from carbon residue in aluminum electrolysis cell by roasting-leaching method

Separation of Excess Fluoride from Water Using Amorphous and Crystalline AlOOH Adsorbents

A Superior Technology for Removing Fluorine from Spent Cathode Carbon: Optimization of the Process by Response Surface Methodology

Process optimization to enhance utilization efficiency of precipitants for chloride removal from flue gas desulfurization wastewater via Friedel's salt precipitation

Separation of alumina from aluminum-rich coal fly ash using NaOH molten salt calcination and hydrochemical process

Mechanism study of synergistic aluminum extraction and purification by ammonium for high-value conversion of secondary aluminum dross

New Process Research on Aluminium Production from Non-Traditional Aluminum Resource by Microwave Chlorination

Aluminum alginate foam synthesis, characterization, and application for low concentration fluoride ion removal

Study on dissociation mechanism and process of regenerated cryolite

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Study on ultrasonic leaching and recovery of fluoride from spent cathode carbon of aluminum electrolysis

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

Study on the Mechanism and Process of Preparing Calcium Fluoride from Regenerated Cryolite

Elimination of the contaminant fluoride ions from plant zinc sulfate electrolytes by aluminum sulfate

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

Removal of fluoride by combined technology of electrocoagulation-flotation-filtration

Preparation of β-AlF 3 from fluorine-containing wastes: Leaching with fluorosilicic acid and crystallization