Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Research on pressure fluctuation induced by tip leakage vortex of axial flow circulating pump under unpowered driven conditions

A Simulation Study of Hydraulic Vibration caused by Clearance Flow in a Pump Turbine

Vortex structure and pressure fluctuation of a pump-turbine in pump mode using large Eddy simulation

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Research on the Influence of Impeller Tip Clearance on the Internal Flow Loss of Axial Circulating Pump Under Unpowered Driven Condition

Pressure pulsation in small opening operating mode of pump turbine’s turbine mode

Research on tip leakage vortex characteristics of axial-flow circulating pumps under unpowered driven conditions

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump

Pressure Fluctuations During the Pump Power-Trip of a Low-Head Pump-Turbine with the Co-Closing of Guide Vane and Ball Valve

Evaluation and Investigation of Hydraulic Performance Characteristics in an Axial Pump Based on CFD and Acoustic Analysis

Pressure Fluctuation Propagation of a Pump Turbine at Pump Mode under Low Head Condition

Energy loss mechanism due to tip leakage flow of axial flow pump as turbine under various operating conditions

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump

Study on the trajectory of tip leakage vortex and energy characteristics of mixed-flow pump under cavitation conditions

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Effect of the tip clearance on tip leakage vortex and pressure fluctuation characteristics in a helico-axial flow multiphase pump

High-amplitude pressure fluctuations of a pump-turbine with large head variable ratio during the turbine load rejection process

Exploring the Mechanism of Strong-Pressure Fluctuation under Partial Load in the Turbine Mode of Pump Turbines for Hydro and Marine Power Storage

Cavitation pressure fluctuation characteristics of a prototype pump-turbine analysed by using CFD