Improve the Intelligent Convenience of Multivariate Optimization of Concrete Mix Ratio and the Development of Corresponding Applications
Zhanfei Yang,Bin Chen,Jianfen Zhou,Saihua Huang
DOI: https://doi.org/10.1155/2024/7433303
IF: 1.843
2024-09-20
Advances in Civil Engineering
Abstract:In order to be more efficient in the optimization of concrete mixture, a new intelligent optimization model of concrete mixture was established by using particle swarm optimization on the basis of the original optimization model, and the specific performance was fitted and predicted by using the support vector machine. Using the optimization model established in this work, the test results of 1,443 groups of mixed ratios show that the prediction accuracy of the new model is better than that of the traditional model. The average relative errors of the 7‐ and 28‐day compressive strengths and initial collapse were 10.42%, 7.43%, and 17.14%, respectively. This method is used in a practical project where a set of C25, C30, C35, and C40 concrete mix ratios are designed. The prediction and actual error of 7‐day intensity and 28‐day intensity are −14.4% to −6.1% and −17.6% to 0.6%, respectively, while the predicted value and actual slump error are 15%. The results show that the error between the measured value and the design value is basically within 15%, which meets the design requirements. The method can reduce the time and cost of concrete production, with the cost per cubic meter after optimization is 3.5–8 CHY lower than the concrete mix calculated by the conventional method. The relative decrease ranges from 1.53% to 3.22%. Finally, a practical quality and cost control system (compos) is established to make the strategy easier to apply.
construction & building technology,engineering, civil