Abstract:Over the past decades, the design of evaporators has experienced improvement due to accruing experimental and numerical research on flow boiling. For micro-finned geometries that are deemed promising in augmentation of thermal performance, several empirical models have been developed. Recently, to attain higher accuracies in modeling, authors also resorted to Artificial Intelligence (AI) techniques while encouraging their further investigations. In this case, a database comprised of 1358 experimental heat transfer coefficients (HTC) and frictional pressure drops per unit length (FPD) has been considered for a holistic assessment of flow boiling modeling methods. The wide range of geometric features within the database, which includes tubes with outside diameters from 3 mm to 7 mm, helps to acquire a more reliable evaluation of the models, since the flow boiling mechanism is strongly dependent on the geometric parameters.After evaluating three empirical models for the HTC, it was confirmed that, depending on the diameter, the flow boiling mechanism undergoes alterations pertinent to a balance between convective and nucleate boiling, and the models must be modified to account for these conditions.The mean average deviation (MAD) for the models was recorded to be 11.7 %, 22.2 %, and 21.5 % for Diani et al., Mehendale, and Tang and Li, respectively. Higher accuracies were obtained after modification of the empirical models, of which the most accurate one provides a MAD of 10.13 %. Moreover, by the implementation of a novel approach, for the first time, a power function correlation has been established among dimensionless parameters for a machine learning-powered model. The MAD of 10.9 % and 15.8 % was reported for the Nusselt number and the two-phase multiplier respectively. Artificial Neural Network (ANN) was also considered for modeling, and MADs of 4.6 % and 4.2 % were recorded for the Nusselt number and two-phase multiplier, respectively.

Theoretical modeling of heat transfer in vertical upward and downward annular flow boiling

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

A heat transfer model for liquid film boiling on micro-structured surfaces

Flow pattern-based heat transfer analysis of microchannel flow boiling: An experimental investigation

Evaporative annular flow in micro/minichannels: A simple heat transfer model

Numerical simulation of boiling behavior in vertical microchannels

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Experimental and computational investigation on two-phase flow and heat transfer of highly subcooled flow boiling in vertical upflow

Comprehensive study of flow boiling modeling inside helical micro-finned tubes: Empirical, non-convex optimization and deep learning predictive models

Investigation of Flow Boiling Heat Transfer Characteristics of CO2in Horizontal Mini-Tube

Flow Boiling in Horizontal Annuli Outside Horizontal Smooth, Herringbone and Three-Dimensional Enhanced Tubes

Experimental Study of Flow Boiling Instabilities in Horizontal Tubes under Gas–liquid Stratification Condition: Effects of Heat Flux and Inlet Subcooling Degree

Theoretical modeling of the boiling annular-mist flow in vertical channels

Experimental investigation of heat transfer coefficient and frictional pressure drop in flow boiling of R513A: Comparative analysis of micro-fin and smooth tubes

Numerical Investigation of Flow Boiling Characteristics in Narrow Rectangular Channels Using Two-Fluid Eulerian Cfd Model Covering a Wide Range of Pressures

Investigation of flow boiling critical heat flux and heat transfer within a horizontally oriented channel with one-sided heating at three levels of subcooled inlet

Flow Boiling in Inner Annulus of Horizontal Enhanced Tubes

Predictive Modeling for Microchannel Flow Boiling Heat Transfer under the Dual Effect of Gravity and Surface Modification

Effect of Forced Convection Heat Transfer on Vapor Quality in Subcooled Flow Boiling

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

Theoretical model for subcooled upward flow boiling heat transfer and critical heat flux for an inclined downward heated surface