Abstract:Multipass welding of high strength steels used for fabrication and joining of transmission pipelines presents a number of metallurgical challenges. A key concern is both the strength and toughness of the heat affected zone (HAZ) adjacent to both seam and girth welds. In this work, a systematic study has been conducted on regions of the heat affected zone in the base metal where the first welding pass produces a thermal excursion which results in a coarse-grained heat affected zone (CGHAZ). The subsequent weld pass involves intercritical annealing of this region, i.e. a microstructure associated with intercritically reheated coarse grain heat affected zone (ICCGHAZ). The small ICCGHAZ region is often identified as being particularly susceptible to crack initiation. This work was undertaken to understand microstructure development in this zone and how the ICCGHAZ may affect the overall performance of the HAZ. Gleeble thermomechanical simulations have been conducted to produce bulk samples representative of different welding scenarios. Charpy impact tests and tensile tests have been performed over a range of temperatures. It was found that when a continuous necklace of martensite-austenite islands form on the prior austenite grain boundaries (i.e. for a M/A fraction of ≈10%), the Charpy impact toughness energy is dramatically decreased and the ductile brittle transition temperature is significantly raised. Detailed studies on the secondary cracks have been conducted to examine the fracture mechanisms in the different microstructures. The results show that the lower bainite microstructures obtained after the 1st thermal treatment, representative of CGHAZ have excellent impact properties. The impact toughness of the microstructures typical of ICCGHAZ is strongly dependent on the composition as well as morphology and spatial distribution of the resulting martensite-austenite (M/A) islands transformed from inter-critically formed austenite. This zone can play a significant role in fracture initiation and thus needs to be considered in alloy and welding process designs.

Optimization of hot forming temperature to minimize liquid metal embrittlement induced cracking in resistance spot welded zinc‐coated medium manganese steel

Zn-induced Liquid Metal Embrittlement and Mechanical Properties of Advanced High-Strength Steel with Resistance Spot Weld

Failure behavior of resistance spot welded advanced high strength steel: The role of surface condition and initial microstructure

Experimental Investigation of Hot Forming of Zn‐Coated Hot‐Stamping Steel

The High-Cycle Tensile-Shear Fatigue Properties and Failure Mechanism of Resistance Spot-Welded Advanced High-Strength Steel with a Zn Coating

Occurrence of sub-critical heat affected zone liquid metal embrittlement in joining of advanced high strength steel

Investigation of the LME Susceptibility of Dual Phase Steel with Different Zinc Coatings

Critical LME elongation: a criterion measured with Gleeble correlated to LME sensitivity during spot welding

Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

Effect of Steel Composition and Processing Parameters on the Penetration Depth of Microcracks in ZnFe‐Coated Boron Steels

Comparative Study on the Liquid Metal Embrittlement Susceptibility of the High-Si Advanced High-Strength Steel with EG and GA Zn Coatings

The Role of HAZ Softening on Cross-Tension Mechanical Performance of Martensitic Advanced High Strength Steel Resistance Spot Welds

Uncovering the mechanism of the LME susceptibility for the galvanized and electrogalvanized DP 1180 steels

The Influence of Electrode Indentation Rate on LME Formation during RSW

HAZ Effects in Hot-Rolled Dual-Phase Steel During Flash Butt Welding of Wheel Rims

Effects of soaking temperature on the microstructure and mechanical properties of a medium Mn steel for hot/warm forming

Formation mechanism of liquid metal embrittlement in laser lap welding of zinc-coated GEN3 steels

Crack generation, propagation mechanism and thermal property of Zn-coated hot stamping steel

Mechanical Behaviour of Intercritically Reheated Coarse-Grained Heat Affected Zone in High Strength Line Pipe Steels

Effect of Intercritical Annealing Time on Hydrogen Embrittlement of Warm-Rolled Medium Mn Steel

Hydrogen embrittlement behavior of high strength low carbon medium manganese steel under different heat treatments