Settlement Calculation Method for Peat Soil Foundations

Bo Peng,Ruiling Feng,Lijian Wu,Kang Wei,Pengcheng Wang

DOI: https://doi.org/10.1061/ijgnai.gmeng-8181

IF: 3.918

2023-07-01

International Journal of Geomechanics

Abstract:The calculation of the settlement of a peat soil foundation is based mainly on the formula obtained by data fitting or simply modifying the universal calculation formula. The deformation mechanism reflected by these calculation methods is indistinct. Therefore, several model tests were carried out using the embankment structure of the Dali–Lijiang expressway as a prototype, and the settlement was analyzed with the one-way consolidation deformation and in situ settlement of other researchers. First, the S − logt (S is the deformation) curve of peat soil showed no obvious inverse “S” change, which is different from that of soft soil or mucky soil. According to the S − t curve, the deformation process of peat soil can be divided into three stages. Second, the relationship between the compression modulus and load was analyzed and combined with the settlement calculation results. The compressive modulus between 12.5 and 25 kPa [En(0.125–0.25)] was proposed to be used when calculating the settlement of peat soil foundations by the layerwise summation method. Moreover, the compression modulus of the three consolidation stages was proposed to be used to calculate the settlement of peat soil foundations by the layered sum method. At the same time, the influence of confinement on the compression modulus of the third consolidation stage should be considered and corrected. The accuracy of the settlement calculation method proposed in this paper was higher than the accuracy of the standard layerwise summation method, regardless of whether the horizontal limiting conditions of the standard method are modified.

engineering, geological