Abstract:A case study of a significant surface settlement induced by tunneling in permeable strata with the shallow tunneling method is presented in this paper. The measurements of surface settlements along the excavation direction were first analyzed to highlight the impacts of groundwater seepage. Due to the groundwater inflow inside a double-arched tunnel, the surface settlement developed to a high level far beyond the measured crown settlement. The settlement-affected zone extended to 4 times the tunnel height ahead of the forefront heading and 1.5 times the tunnel height behind the hindmost heading. Consolidation resulting from high pore pressure change was considered to be the main mechanism for the large surface settlements. In addition, a 3D fluid-mechanical coupled numerical analysis was carried out to confirm the relationship between the significant surface settlement and pore pressure variation. This analysis reveals that lowering the permeability of the small pipe grouting zone, especially of the primary lining, could lessen the drop in pore pressure in the overlying strata, further reducing the total surface settlement. The numerical results also suggest that the transverse range of vertical displacement could be quite wide, and the settlement developed integrally from the tunnel crown towards the ground surface due to groundwater seepage. Moreover, the effect of advance drainage on surface settlement was investigated based on the same numerical model. Drainage with horizontal boreholes could considerably increase the safety of tunnel heading but had limited impact on surface settlement. Finally, the applications of pre-grouting and advance drainage measures were discussed for tunneling cases in permeable strata.

Application of Three-Parameter Model in Settlement Calculation of Immersed Tube Tunnel

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Calculation and Distribution of Vertical Differential Settlement in Immersed Tunnels

Summary of Model Tests and Settlement Characteristics of Base Layer in Immersed Tube Tunnel

Surface Settlements Induced by Tunneling in Permeable Strata: a Case History of Shenzhen Metro

Calculation and Analysis of Pipe Joint Settlement Control in Large Back Silting Immersed Tube Tunnel

Analysis of Settlement Reasons and Mechanism in Immersed Tunnel

Analysis of Settlement Control Measures in Immersed Tunnel

Model tests on compression of base layer of immersed tube tunnels considering siltation

Study of Calculation Methods for Ground Surface Settlement Induced by Rectangular Pipe Jacking Tunnel Boring in Soft Soil

Mathematical Modelling for Interaction Between Soft Ground and Small Curvature Shield Tunneling Considering Viscoelastic Characteristics Influences

Settlement prediction on an operational immersed tube tunnel

Research on Three-Dimensional Soil Deformation Induced by Double-O-Tube Shield Tunneling

Finite Element Simulation of Shallow-Buried and Mining Tunnelling in Adjacent Frame Structures

Study on width coefficients of surface settlement troughs induced by shallow-buried tunneling method

Prediction of Ground Settlement Due to Excavation of a Quasi-Rectangular Shield Tunnel Based on Stochastic Medium Theory

Analysis of Settlement of an Existing Tunnel Subjected to Undercrossing Tunneling Based on the Modified Vlasov Model

Calculation of Vertical Displacements of Underground Pipelines Induced by Shield Tunneling Based on Unified Solution

Improved vertical displacement calculation model for immersed tube tunnel considering tidal load

Long-term Settlement of Tunnels Across a River Induced by Vehicle Operation

3-D Numerical Simulating Study on Excavation of Shallow Burying Tunnel Through the Building Foundation