Abstract:We report on the construction and upgrade of a Lawrence Berkeley National Laboratory Cosmic Muons Detector. We modify the electronics and mechanics to achieve a highly efficient gamma-ray and cosmic-ray detector. Each detector module uses a one-inch-thick scintillator, attached to a photomultiplier tube (PMT) and mounted on a solid aluminum frame. The detector uses scintillation to transform passing radiation into detectable photons that are guided toward a photocathode surface of the PMT, triggering the release of photoelectrons that are then amplified to yield measurable electronic signals. The modules were connected to an electronics section that compared the signals from the two PMTs and logically determined if they were coincidence events. A data-collection device was added for faster and prolonged count rates. A cobalt-60, which produced two gamma rays and a beta particle has been used as a calibration source. To investigate the isotropic behavior of radiation, two detection modules were adjusted to different angles of rotation with respect to each other, and the coincidence counts were measured. The coincidence counts from the modules set at various angles were consistent throughout the angular spectrum, and only lead shielding visibly reduced the number of counts from the radioactive source. The inverse-square-law behavior of radiation has also been considered. The results were such that the number of counts decreased as a function of increasing distance from the source. Furthermore, positioning the detector to point toward the sky in different orientations, we measured cosmic ray muon flux as the angle from the vertical was decreased. In doing so, we scanned different patches of the atmosphere. For the optimum operation during the detection phase, we plateaued both PMTs to single out their best operating gain voltage while eliminating false background noise signals.

Characterization of the basic unit in a multi-channel SiPM muography detector using cosmic muons

Characterization of Silicon-Photomultipliers for a Cosmic Muon Veto detector

Analysis of Gamma Rays and Cosmic Muons with a Single Detector

Prototype Cherenkov Detector Characterization for Muon Tomography Applications

Exploring Advanced Detector Technologies for Muon Radiography Applications

Cosmic muons as PMT and SiPM detector background signals

Study of detection efficiency distribution and areal homogeneity of SiPMs

Towards a portable high-resolution muon detector based on Resistive Plate Chambers

Electronics design for a muon imaging system using triangular plastic scintillators with WLS fiber readouts

MuGrid: A Scintillator Detector Towards Cosmic Muon Absorption Imaging

Using Cosmic Ray Muons to Assess Geological Characteristics in the Subsurface

Fast timing detectors for the muon system of a muon collider experiment: requirements from simulation and prototype performance

Characterization of a SiPM-based monolithic neutron scatter camera using dark counts

Calibration of a Micromegas-based Gaseous Time Projection Chamber Using Cosmic Ray Muons

Pre-production and quality assurance of the Mu2e calorimeter Silicon Photomultipliers

Simulated Detector Performance at the Muon Collider

Qualification study of SiPMs on a large scale for the CMVD Experiment

Irradiation study of UV Silicon Photomultipliers for the Mu2e Calorimeter

Test Beam Characterization of a Digital Silicon Photomultiplier

Test and characterization of SiPMs for the upgrade of MEGII high resolution Timing Counter

A new detector for glaciers melting monitoring through muon tomography