Abstract:The increasing utilization of CO2 for synthesizing high-value fuels or essential chemicals is a potentially effective approach to mitigating global warming and climate change. Compared to thermal catalytic CO2 conversion under harsh operating conditions (400∼500°C, 10 MPa), non-thermal plasma can overcome kinetic barriers and trigger reactions beyond thermal equilibrium at ambient temperature and pressure. In this study, the effects of operating conditions (discharge frequency, input power, and gas flow rate) and geometrical parameters (discharge length, discharge gap, and dielectric materials) have been extensively analyzed using typical cylindrical dielectric barrier discharge (DBD) plasma. The discharge characteristics changed by operating conditions (including waveforms of applied voltage and current) are compared, indicating higher applied voltage and lower gas flow rate can strengthen the filamentary discharges. The results demonstrate CO2 conversion rate increases with the increase of applied voltage and the decrease of CO2/H2 ratio, achieving its maximum value of 43.0% at 20 mL/min. The highest energy efficiency of 3771.9 μg/kJ for CO generation is obtained at the applied voltage of 5.5 kV and gas flow rate of 40 mL/min, respectively. Besides, the structure of plasma reactor also impacts the performance of CO2 conversion. On the one hand, the discharge gap has a significant role in the variation of CO2 conversion and product selectivity, which is attributed to the electric field density and corresponding electron-induced reaction. On the other hand, the circulating water-cooling jacket was used to find out the influence of reaction temperature, which switched the product from CO to CH4. This work will pave the way for a sustainable alternative towards future CO2 conversion and utilization.

Hybrid plasma-thermal system for methane conversion to ethylene and hydrogen

Hybrid plasma catalysis-thermal system for non-oxidative coupling of methane to ethylene and hydrogen

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Direct Conversion of Methane to Propylene

Hydropyrolysis of N-Hexane and Toluene to Acetylene in Rotating-Arc Plasma

Methane Incorporation into Liquid Fuel by Non-Equilibrium Plasma Discharges

Direct Combination of Hydrogen Evolution from Water and Methane Conversion in a Photocatalytic System over Pt/TiO2

Application of Non-Thermal Plasma Technology on Fugitive Methane Destruction: Configuration and Optimization of Double Dielectric Barrier Discharge Reactor

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process

Bi-reforming of Methane in a Carbon Deposit-Free Plasmatron with High Operational Adaptability

Plasma-Enhanced Chemical Looping Oxidative Coupling of Methane through Synergy between Metal-Loaded Dielectric Particles and Non-Thermal Plasma

Direct Conversion of Methane to Ethylene and Acetylene over an Iron-Based Metal-Organic Framework

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Basic Research on Conversion of Greenhouse Gases by Thermal Plasma Technique

Unveiling the Mechanism of Plasma-Catalyzed Oxidation of Methane to C 2+ Oxygenates over Cu/UiO-66-NH 2

Warm plasma catalytic coreforming of dilute bioethanol and methane for hydrogen production

Distributed electrified heating for efficient hydrogen production

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

Hydrogen‐Rich Syngas Production by DC Thermal Plasma Steam Gasification from Biomass and Plastic Mixtures

Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma