Abstract:Multi-gigahertz fundamental repetition rate, tunable repetition rate and wavelength, ultrafast fiber lasers at wavelengths of 1.0, 1.5, and 2.0 µm are experimentally demonstrated and summarized. At the wavelength of 1.0 µm, the laser wavelength is tuned in the range of 1040.1-1042.9 nm and the repetition rate is shifted by 226 kHz in a 3-cm-long all-fiber laser by controlling the temperature of the resonator. Compared with a previous work where the maximum average power was 0.8 mW, the power in this study is significantly improved to 57 mW under a launched pump power of 213 mW, thus achieving an optical-to-optical efficiency of 27%. For comparison, a similar temperature-tuning technique is implemented in a Tm3+-doped ultrafast oscillator but, as expected, it results in a broader tunable range of 14.1 nm (1974.1-1988.2 nm) in wavelength as compared with the value of 1.8 nm for the wavelength of 1.0 µm. The repetition rate in the process is shifted by 294 kHz. For the high-frequency range from 100 kHz to 10 MHz, the value of integrated timing jitter gradually increases with an increase in temperature. Finally, to the best of our knowledge, for the first time, a new method for tuning wavelength and repetition rate is proposed and demonstrated for a femtosecond fiber laser at the wavelength of 1.5 µm. Through fine rotation of the alignment angle between the Er/Yb:glass fiber and a semiconductor saturable absorption mirror, the peak wavelength can be tuned in the range of 1591.4-1586.1 nm and the repetition rate is shifted by 60 kHz.

High-power and high-speed all-optical all-fiber wavelength-swept source at 2 μm based on a femtosecond laser and time stretch technique

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

Polarization-isolated Stretched-Pulse Mode-Locked Swept Laser for 10.3-Mhz A-line Rate Optical Coherence Tomography.

All-Fiber Ring-Cavity Based Frequency Swept Laser Source for Frequency Domain Oct

Wide-band and Fast Wavelength-Swept Optical Parametric Oscillator with a Photonic Crystal Fiber Based on Dispersion Tuning Technology at 1 Μm

Pulsed swept-source FDML-MOPA laser with kilowatt picosecond pulses around 1550 nm

Low noise, self-phase-modulation-enabled femtosecond fiber sources tunable in 740-1236 nm for wide two-photon fluorescence microscopy applications

3 GHz, Yb-fiber laser-based, few-cycle ultrafast source at the Ti:sapphire laser wavelength

Fast and Wide Tuning Wavelength-Swept Source Based on Dispersion-Tuned Fiber Optical Parametric Oscillator

Fiber-Based High-Energy Femtosecond Pulses Tunable from 920 to 1030 Nm for Two-Photon Microscopy

All-fiber GHz few-cycle pulse generation at 2 µm

All-fiber Wavelength-Swept Optical Parametric Oscillator at 1 Μm Band

All-Fiber Generation of Sub-30 Fs Pulses at 1.3-Μm Via Cherenkov Radiation with Entire Dispersion Management

3-Ghz, Ultrafast Yb-fiber Laser Sources: Closing the Spectral Gaps

1 \mu M Wavelength Swept Fiber Laser Based on Dispersion-Tuning Technique

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

High-repetition-rate Ultrafast Fiber Lasers.

Fiber Fabry-Perot tunable filter based Fourier domain mode locking swept laser source