Abstract:Modified attapulgite (ATP-PS) grafted with polystyrene (PS) was prepared based on Pickering emulsion polymerization. The characterization of ATP-PS was studied by transmission electronic microscopy (TEM), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectrometer (FTIR) and contact angle analysis. TEM analysis showed that the surface of ATP-PS was coated with PS organic layer; XPS analysis showed that the proportion of C element in ATP-PS was much larger than that of ATP; FTIR analysis found that ATP-PS had more PS specific functional group peaks than that of ATP; Moreover, contact angle results showed that the hydrophobicity of ATP-PS was significantly improved compared with ATP. The above characterization analysis proved that the modification of ATP-PS was successful. Moreover, polyphenylene sulfide (PPS) hydrophobic porous membrane was prepared with 1-chloronaphthalene and dibutyl phthalate as mixed diluents and ATP-PS as additives. The results showed that 0.8 wt% of ATP-PS had a great effect on the structure and performance of the membrane. With the increasing of the mass proportion of ATP-PS in the preparation of PPS base membrane, the microstructure of PPS based membrane was changed from blocky bicontinuous to spherical granular bicontinuous. When the addition amount of ATP-PS was 0.8 wt% of the total mass of PPS base membrane, PPS based membrane had strong hydrophobicity and organic solvent affinity, and its n -butanol flux could reach 106.9642 L m −2 h −1 bar −1 . The rheological properties of PPS based membrane showed that ATP-PS was well compatible with the PPS, and ATP-PS was beneficial to crosslink between PPS molecular chains, thereby increasing the mechanical properties of PPS based membrane. Phase transition analysis demonstrated that ATP-PS (0.8 wt%) increased the melting temperature (2.34 °C) and crystallization temperature (2.63 °C) of PPS based membrane compared to PPS, thus allowing PPS to complete the phase transition at higher temperature interval during film formation, resulting in a stable microscopic cluster structure. Based on hydrophobic porous PPS membrane, PPS/ATP-PS/TA nanocomposites membrane with ATP-PS selective layer was prepared by co-deposition of tannic acid (TA) and ATP-PS on the surface of PPS membrane. The performance of PPS/ATP-PS/TA nanocomposites membrane was studied, which showed that the n -butanol flux of PPS/ATP-PS/TA nanocomposites membrane was 61.2913 L m −2 h −1 bar −1 . More importantly, the simulated filtration performance of MB dye organic waste liquid (the solvent is n -butanol) showed that the maximum rejection rate of MB dye reached 99.82%. These results demonstrate that PPS/ATP-PS/TA nanocomposites membrane will have potential application in the filtration of organic dye wastewater.

Preparation, performance and structure-properties relationship of polyphenylene sulfide/ATP-PS/co-deposition of tannic acid nanocomposites membrane

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Preparation on PVP Modiifed Acid-Base Composite High Temperature Proton Exchange Membrane

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

A novel PPTA/PPy composite organic solvent nanofiltration (OSN) membrane prepared by chemical vapor deposition for organic dye wastewater treatment

Controllable preparation of novel “ridge-valley shaped” poly(p-phenylene terephthamide) (PPTA) hollow fiber nanofiltration membrane for thermal dye/salt wastewater separation

Cu-TCPP Nanosheets Blended Polysulfone Ultrafiltration Membranes with Enhanced Antifouling and Photo-Tunable Porosity

Preparation and properties of polyamide/titania composite nanofiltration membrane by interfacial polymerization

Proton Conductivity Improvement of Sulfonated Poly(ether Ether Ketone) Nanocomposite Membranes with Sulfonated Halloysite Nanotubes Prepared Via Dopamine-Initiated Atom Transfer Radical Polymerization

Fabrication and Performance Study on Poly(p-Phenylene Terephthamide)porous Membrane

Advanced PPS/MOFs composite nanofiltration membranes derived from contra-diffusion synthesis for precise molecular separation

Polyvinyl Alcohol/attapulgite Interlayer Modulated Interfacial Polymerization on a Highly Porous PAN Support for Efficient Desalination

Bimetallic polyphenol networks structure modified polyethersulfone membrane with hydrophilic and anti-fouling properties based on reverse thermally induced phase separation method

Modification of PSf/SPSf Blended Porous Support for Improving the Reverse Osmosis Performance of Aromatic Polyamide Thin Film Composite Membranes.

Preparation of Nano-TiO2-Modified PVDF Membranes with Enhanced Antifouling Behaviors via Phase Inversion: Implications of Nanoparticle Dispersion Status in Casting Solutions

Effect of Coagulation Bath Composition on Themembrane-Forming and Properties of PVDF/TA-ATP Hybrid Membrane

Tethering Hydrophilic Polymer Brushes Onto PPESK Membranes Via Surface-Initiated Atom Transfer Radical Polymerization

Effect of TiO2 Nanoparticles on the Surface Morphology and Performance of Microporous PES Membrane